answersLogoWhite

0

12/240, 0.05 amps, maybe about 30% more because of the poor power factor of small Transformers.

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Natural Sciences

How many amps does a 120 Volt irrigation controller draw?

Different controllers have different outputs depending on how many valves are on each zone. In the device there is a control transformer. Look for the VA output of the transformer's secondary side. Mine states 20 VA at 24 volts. To find the amperage use the following equation. I = W/V. Amps = Watts or VA/Volts. Mine can output 20 divided by 24 = .83 amps. This amperage will be the maximum output in amps that the controller can produce to operate the zone valves. To find the current draw of the primary side of the transformer divide the transformers VA by 120 volts.


How many amps can you get from a 500Kva transformer?

The amps you can get from a 500 kVA transformer would depend on the voltage of the transformer's output. To calculate amperage, you can use the formula: Amps = Power (kVA) / Voltage. For example, if the output voltage is 480V, you would get approximately 1041 amps (500 kVA / 480V).


How many amps does a 277 volt primary and 120 volt secondary transformer draw with 6 amps on the secondary?

Assuming the transformer is ideal, the current on the primary side can be calculated using the formula for power: P(primary) = P(secondary). Since power is the product of voltage and current, the current on the primary side would be 1.38 amps (277V x Iprimary = 120V x 6A).


How many amps 3 pH 2 hp 240 v draw?

100 amps


How many amps will a 250 kVA transformer in 220 volts secondary?

To calculate the amperage in the secondary side of a transformer, you can use the formula: Amps = kVA / (Volts x Sqrt(3)). For a 250 kVA transformer with a 220-volt secondary, the amperage will be approximately 660.4 Amps.

Related Questions

How many amps does a 5v transformer draw?

There are actually three pieces to this puzzle - resistance. And you're missing that one.


How many amps does a 3 kva transformer draw?

The primary current of a transformer depends upon the secondary current which, in turn, depends upon the load supplied by the transformer. There is not enough information in the question to determine the rated primary and secondary currents of the transformer.


What is the ampere range value of transformer?

This typically has to do with how many amps you can safely pull from the secondary of the transformer.


How many amps does a 120 Volt irrigation controller draw?

Different controllers have different outputs depending on how many valves are on each zone. In the device there is a control transformer. Look for the VA output of the transformer's secondary side. Mine states 20 VA at 24 volts. To find the amperage use the following equation. I = W/V. Amps = Watts or VA/Volts. Mine can output 20 divided by 24 = .83 amps. This amperage will be the maximum output in amps that the controller can produce to operate the zone valves. To find the current draw of the primary side of the transformer divide the transformers VA by 120 volts.


How many amps will a 0.25 kilo volt amp transformer at 120 volts put out?

2.083 amps


How many amps can you get from a 500Kva transformer?

The amps you can get from a 500 kVA transformer would depend on the voltage of the transformer's output. To calculate amperage, you can use the formula: Amps = Power (kVA) / Voltage. For example, if the output voltage is 480V, you would get approximately 1041 amps (500 kVA / 480V).


How many amps does a 277 volt primary and 120 volt secondary transformer draw with 6 amps on the secondary?

Assuming the transformer is ideal, the current on the primary side can be calculated using the formula for power: P(primary) = P(secondary). Since power is the product of voltage and current, the current on the primary side would be 1.38 amps (277V x Iprimary = 120V x 6A).


Unanswered questions-how many amps for a 500KVA transformer.?

To determine the amps for a 500 kVA transformer, you can use the formula: Amps = kVA × 1000 / (Voltage). For example, at a standard voltage of 480V, the calculation would be 500,000 VA / 480V, which equals approximately 1041.67 amps. The specific current will vary based on the voltage level used with the transformer.


How many amps does a 600 watt low voltage transformer box pull?

The transformer itself does not pull current. Whatever you connect to the transformer pulls current. Whatever the output voltage of the transformer is, divide that into 600 and you get maximum current possible without burning up the transformer. At 24V that's 25 amps.


How many amps will a 10 kva transformer handle?

It depends on how many amps it was designed for. A 12.5kV/600v 10kVA 3 phase transformer can handle ~.5 amps on the primary and ~10A on the secondary. A 600/120V 10kVA 3 phase transformer can handle ~10A on the primary and ~50 on the secondary.


How many amps 3 pH 2 hp 240 v draw?

100 amps


How many amps will a 37.5 KVA transformer carry?

It depends on the rated voltage of its secondary.