0
What else can I help you with?
BTU per pound of natural gas?
Natural gas typically produces around 20,000 to 25,000 BTUs per pound when burned.
How many BTUs does it take to heat 390 gallon tank of water from 60 degrees to 248 degrees?
The specific heat of water is 1 BTU per pound per degree Fahrenheit. There are 8.3378 lbs/gallon at 60 degrees, which equals 3251.742 pounds of water. The number of BTUs to raise it 188 degrees is then 611,327.496 BTUs.
How much gas does it take to heat a gallon of water?
Heating a gallon of water by one degree Celsius requires around 8,337 BTUs (British Thermal Units) of energy. Since 1 cubic foot of natural gas produces about 1,031 BTUs, you would need roughly 8 cubic feet of natural gas to heat a gallon of water by one degree Celsius.
Cubic feet of natural gas compared to a gallon of propane?
Oh, dude, you're hitting me with the units here! So, like, a cubic foot of natural gas has about 1,031 BTUs, while a gallon of propane has around 91,500 BTUs. That means a gallon of propane has like 88 times more energy than a cubic foot of natural gas. So, if you're looking to fuel a fire pit for a cozy evening, propane is the way to go!
How Many BTU's per barrel of crude oil?
Approximately 5,800,000 BTUs per 42-gallon barrel.
How many BTU's per gallon of kerosine?
One gallon of kerosene will produce 134,000 BTUs of energy when burned.
How many BTUs per gallon of petrol?
About 114,000 BTU per US gallon.
How many BTUs does it take to raise the temperature in a 40 gallon water heater 60 degrees F?
To calculate the BTUs needed to raise the temperature of a 40-gallon water heater by 60 degrees Fahrenheit, you can use the formula: BTUs = gallons × temperature rise × 8.34. For a 40-gallon heater, it would be 40 gallons × 60°F × 8.34 BTU/gallon°F, resulting in approximately 20,016 BTUs. Therefore, it takes about 20,016 BTUs to achieve that temperature increase.
How long will a gallon of Kerosene burn at 30000 btu hours?
A gallon of kerosene typically contains about 135,000 BTUs of energy. At a burn rate of 30,000 BTUs per hour, a gallon of kerosene would last approximately 4.5 hours (135,000 BTUs ÷ 30,000 BTUs/hour = 4.5 hours). However, actual burn time can vary based on factors such as efficiency and burner design.
What is the Gallon Per Hour use of a kerosene heater?
Depends on the BTUs of the heater.
BTU per pound of natural gas?
Natural gas typically produces around 20,000 to 25,000 BTUs per pound when burned.
How many BTUs are in a gallon of propane?
Type your answer here... there are around 91,600 BTUs in a gallon of propane. The standard BBQ sized bottle of propane contains 11 pounds of propane. Propane weighs about 4.2 pounds per gallon, so that 11 pounds of propane is about 2.5 gallons in its liquid state. That means there is 91,600 BTUs/Gal times 2.5 gallons so a BBQ sized tank of propane contains about 2.3 million BTUs. If your BBQ has a 50,000 BTU burner, on high heat, it will last a bit over 4 and half hours of run time.
How many BTUs are there in a gallon of Kerosene?
1 gallon for #1 Kerosene produces 135,000 BTUs. #1 Kerosene is closely related to #1 Diesel and JP8 (Jet Fuel) - they differ chiefly in additives. Likewise, #2 Kerosene, Diesel #2, and Furnace Oil are similar to one another. #2 oils have higher sulfur content, which leads to more eye and lung irritation from the emissions. However, they are also comprised of longer hydrocarbon chains, and therefore weigh more per gallon and also have somewhat higher energy content.
How many BTU of energy in one gallon of liquid petroleum gas?
How many Btus if 1 cubic foot of Liquid Petroleum
How many BTU to raise 1 gallon of oil one degree?
To raise the temperature of 1 gallon of oil by 1 degree Fahrenheit, it typically requires about 1,800 BTUs. This value can vary slightly depending on the specific type of oil, but 1,800 BTUs is a commonly accepted estimate for heating purposes.
How many btus in a gallon of biodiesel?
A gallon of biodiesel contains approximately 120,000 to 130,000 British thermal units (BTUs). The exact BTU content can vary slightly depending on the specific composition and feedstock used to produce the biodiesel. Generally, biodiesel has a lower energy content compared to traditional diesel fuel.
How many therms to heat one gallon of water 50 degrees?
To heat one gallon of water by 50 degrees Fahrenheit, you need approximately 0.2 therms of energy. This is based on the fact that it takes about 8.33 BTUs to raise the temperature of one gallon of water by one degree Fahrenheit, totaling around 416.5 BTUs for a 50-degree increase. Since one therm is equivalent to 100,000 BTUs, the calculation gives you about 0.00416 therms per degree, resulting in roughly 0.2 therms for the total increase.
