it depends upon the duty of motor if it is s1 then only one start
Open ended induction motor - i assume you are talking about split phase induction motor. With these motors old style speed controlling method using external resistors can be used. However this is now obsolete.
yes
A CSIR motor stands for Capacitor Start-Induction Run motor, which is a type of single-phase induction motor commonly used in household appliances like refrigerators and air conditioners. It uses a capacitor to provide the starting torque needed to initiate rotation, then operates as a standard induction motor once up to speed.
Table fans typically use an AC induction motor, which is cost-effective, efficient, and reliable for driving the fan blades. The motor is designed to provide the necessary torque and speed for the fan to effectively circulate air in a small space.
The direction an induction motor will turn depends upon the direction of the rotating field setup by the winding. Remember in AC the direction of the current reverses itself 120 times every second for a 60 hz system. So no it will not turn in the "direction" of the current.
Yes the Induction motor works on Electromagnetic induction principle.
The induction motor is the special kind of motor which runs below and above the synchronous speed. which the synchronous motor runs nearly equal the synchronous speed. The operation of synchronous motor runs with dc field excited hence separate dc field current is given to the field circuit. where as the induction motor the field and main field is drawn from the same supply hence no excitation is required. But due to this separate starting mechanism has to be required in case of the single phase induction motor.
Induction motor is an AC electric motor which uses electromagnetic induction to induce the electric current in the rotor to produce torque.
k;kl;kl;
AC Induction Motor
A single phase induction motor is mainly used in fans.It is capacitor start capacitor run induction motor.In three phase induction motor squirrel cage induction motor is mainly used in elevators,lifts,cranes.slip ring induction motor is mainly used in electrically driven ships.
mnhjjhjjhnbn
yes
1. Induction Motor has an air-gap but transformer has no air gap rather it is mutually link. 2. Induction Motor has high no-load current than transformer. 3. Induction Motor is a dynamic device. 4. Induction Motor has high power factor.
Induction motor used in industries for variable speed machines . Induction motor has always lagging power factor. Less cost compared to syn. Motor.
single-phase induction motor is used in ceiling fan.
Standard induction motor has a closed squirrel cage rotor, where as open ended induction motor has split phase rotor.