There are approximately 28 grams in one ounce of motor oil.
Incorrect Answer: There are 177 grams in one fluid ounce of water. However, fluid ounces is a measure of volume and grams is a measure of mass (weight), so the answer is dependent on the density of the material in question. Oil, for example, is less dense than water and, depending on the type of oil, would be less than 177 grams. Reasoning: One pound is approximately 454 grams. If one fluid ounce of water is 177 grams, that would equal about 0.39 pounds per fluid ounce. As there are 128 fluid ounces in a gallon, by those calculations a gallon would weigh just under 50 pounds. If, instead, we assume a gallon weighs only 8 pounds, then one fluid ounce of water would weigh about 28-29 grams. The part about density is accurate. that is absolutely right
Yes, gasoline is generally lighter than motor oil. Gasoline has a lower density, typically around 0.71 to 0.77 grams per milliliter, while motor oil usually has a density ranging from about 0.85 to 0.9 grams per milliliter. This difference in density means that gasoline will float on top of motor oil if the two are mixed.
1 grams
There can be no conversion. A gram is a measure of mass. A fluid ounce is a measure of volume. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid. Consider a fluid ounce of water. How many grams? Next consider the same volume of oil. How many grams? The masses of equal volumes of the two substances will clearly be very different. So there is no direct conversion between mass and volume: you need to know the density of the substance to enable you to carry out the conversion.
0.7 liters of motor oil is equal to approximately 23.67 fluid ounces.
14 grams of palm oil is about a half of an ounce if that helps.
The answer depends on what kind of oil you're measuring. Different oils have very different densities.
Incorrect Answer: There are 177 grams in one fluid ounce of water. However, fluid ounces is a measure of volume and grams is a measure of mass (weight), so the answer is dependent on the density of the material in question. Oil, for example, is less dense than water and, depending on the type of oil, would be less than 177 grams. Reasoning: One pound is approximately 454 grams. If one fluid ounce of water is 177 grams, that would equal about 0.39 pounds per fluid ounce. As there are 128 fluid ounces in a gallon, by those calculations a gallon would weigh just under 50 pounds. If, instead, we assume a gallon weighs only 8 pounds, then one fluid ounce of water would weigh about 28-29 grams. The part about density is accurate. that is absolutely right
Doesn't matter whether it's salt, limestone, motor oil, gold, or foot powder.480 milligrams = 0.48 grams
About 245 grams of oil
13.2
Yes, gasoline is generally lighter than motor oil. Gasoline has a lower density, typically around 0.71 to 0.77 grams per milliliter, while motor oil usually has a density ranging from about 0.85 to 0.9 grams per milliliter. This difference in density means that gasoline will float on top of motor oil if the two are mixed.
4 oz1 cup = 8 ounces 1 ounce = 0.12 cup
0.35273962
Diesel fuel is generally lighter than motor oil. Diesel typically has a density of around 0.85 to 0.87 grams per cubic centimeter, while motor oil can range from 0.85 to 0.95 grams per cubic centimeter, depending on its formulation and viscosity. Therefore, while there can be some overlap, motor oil is often heavier than diesel.
The density of motor oil typically ranges from about 0.8 to 0.9 grams per milliliter (g/ml), depending on the specific formulation and temperature. Therefore, for 25 ml of motor oil, the mass would be approximately between 20 to 22.5 grams. To get an accurate density, it's best to consult the specifications provided by the manufacturer for the specific type of motor oil in question.
The Honda power washer can use any SAE certified two cycle engine motor oil. The motor oil usually is available in one ounce bottles.