PV=nRT - Pressure*Volume=moles* 0.0821 (constant) * Temperature (K) This is the be-all and end-all equation for gas laws. But for this particular question, you can use (P1)(V1) = (P2) (V2) P = Pressure, V = Volume (17 atm)(15 L) = P (18 L) solve for P.the pressure is halved
18 mL's equal how many tablespoons.
18
18 centimeters = 1.8 decimeters
548.64 centimeters are in 18 feet
i wouldn't go more then 10 but u might get away with more i have a 95 eclipse gsx running 18 psi
18 to open a deposit account. Depends on the bank for a minor, but a parent has to be the co-signer if you want an ATM card. After the age of 18, the parent is no longer required
PSI stands for pounds per square inch, which is a unit of pressure. The typical pressure range for a radiator system is between 12-18 psi when the engine is cold. It is important to check and maintain proper pressure to ensure optimal cooling efficiency and prevent overheating.
You need to multiply by 0.036. So 5 x 0.036=.18 psi
the normal boost is 5-12 psi. the normal vac is about 18-20 psi
The pressure of water increases about 0.445 psi per foot of depth. If we "zero" our meter so we have "no" pressure at the surface (ignoring the normal 14.7 psi of air pressure at sea level), at 18 feet we will have 0.445 psi/ft times 18 feet, which is 8.01 psi, or right at about 8 psi.
To calculate the psi (pounds per square inch) exerted by an 80,000 lb 18-wheel semi-trailer on the ground, you need to consider the number of wheels and the total weight. If the trailer has 18 wheels, the weight per wheel is 80,000 lbs divided by 18, which is approximately 4,444 lbs per wheel. The psi can be calculated by dividing the weight per wheel by the contact area of the tire; for example, if a typical semi-truck tire has a contact patch of about 100 square inches, the psi would be approximately 44.44 psi.
Water temp 180-200 deg. Pressure 18-22 psi.
To calculate the force generated by the piston, you can use the formula: Force = Pressure × Area. Given that the pressure is 100 psi and the area is 18 square inches, the force is 100 psi × 18 in² = 1,800 pounds. Therefore, a force of 1,800 pounds is generated when 100 psi is applied to the piston.
Minimum oil pressure--- At 1000 RPM is 6 PSI At 2000 RPM Is 18 PSI At 4000 RPM is 24 PSI Anything over that is fine, as long it don't excead over 65 PSI.
14 to 18 psi in all of the cooling system
No less then 6 PSI. At 1000 RPMs. 18 PSI. are more at 2000 RPMs. 24 PSI. are more at 4000 RPMs. And that is factory specs.