Water temp 180-200 deg. Pressure 18-22 psi.
Yes, water has a very high "heat capacity".
water/coolant temperature is controlled and maintained by the thermostat, most common temp. is 192 F. This temp allows both most efficient engine operation and adequate cabin heat.
Check you've got water in the cooling system.
With heat pumps supply air temp will vary with outdoor temp. The colder it gets outside the less efficient the heat pump will be (colder supply air).
Temp is the same, the quantity of heat is not.
Beause heat is transfered by high temp to low temp.If a system heats up so that its temperature is greater than atmospheric temperature the systan has high temp than atmospheric temp as heat transfer from high temp to low temp heat radiates from the system.
An ouside air temp changeover thermostat. lc
Yes, but it is not recommended to run straight water in the cooling system.
In a closed loop system, the water temperature will generally maintain a stable temperature, such as 50 degrees, as long as there is no heat loss or gain from external sources. However, if there are inefficiencies in the system, such as heat loss through insulation or heat exchange with the environment, the temperature may drop over time. Additionally, if the system is actively using heat (e.g., for heating purposes), the temperature will decrease unless it is replenished with heat.
the temp of the intake manifold is controlled by the temp of the water in the block.
Unicorn water
4.18 joules over grams n temp