120 volts and 240 volts. Typically 240 volts is supplied to the house electrical service entrance. It is split into it's 120 volt components via two buss bars. Hooking a circuit up to just one bar yields 120 volts. Hooking into both gives 240 volts.
In the United States toasters run on 120 volts.
To determine the watts needed to run a 12-volt drill charger, you can use the formula: Watts = Volts x Amps. If you know the amperage of the charger, you can multiply it by 12 volts to find the wattage required.
No, a 220 volts AC fan cannot run directly from a 12 volts battery. The fan requires a much higher voltage to operate efficiently. You would need a power inverter to convert the 12 volts from the battery to 220 volts AC to power the fan.
45 volts
Depends on the country
12 volts
14 volts
12 volts...max 13.8 volts
In the United States toasters run on 120 volts.
240 volts
12 volts DC.
Yes if the house supply is 220-240 volts. The required voltage range should be printed somewhere on the fan.
No less then 13.8 and no more then 14.2 Volts with engine running.
As many as will fit. The limit is usually determined by other factors, such as how many amps or watts are required rather than how many volts.
Normally that would be however many volts your house runs on. The US/Canada standard is 120 volts at 60 hertz, while most of Europe runs on 240 volts at 50 hertz. Keep in mind though there are all types of light bulbs that run on all voltages from 12 to 240. It should say the voltage on the bulb though? but if you live in North America and you are asking about a normal house-type bulb, your quest will most likely end with 120.
208 to 240 volts depending on your local power supply.
Yes, if the appliance was designed to run on 210 to 240 volts.