The voltage required to make an arc of 0.5cm can vary depending on factors such as air density and humidity. However, as a general guide, a voltage of around 3,000 to 10,000 volts may be needed to create an arc of 0.5cm in air at atmospheric pressure.
It typically takes around 30,000 to 50,000 volts to create an arc of 0.5 cm in air. The exact voltage required can vary based on factors such as humidity and air pressure.
A 1 HP motor running at 120 volts will draw approximately 746 watts. This calculation is based on the formula: Watts = Volts x Amps.
Assuming a standard D battery has a voltage of 1.5 volts, it would take approximately 35 D batteries (52 volts / 1.5 volts per battery = 34.67). However, in reality, you cannot directly power a 52 volt light bulb using D batteries as the voltages do not match.
A lot. Especially if you're making it go through air. Air is very resistant to electricity and it takes several hundred just to jump a centimeter.
Watts is what you get by multiplying Amps times Voltage, so unless you know Voltage there's no way of telling. For 100 Volts you'd get 250 Watts at 1 amp, for 50 Volts you get it at 5 Amps, and so on.
Volts don't make power. Watts do. Watts = (volts) x (amps) 1 horsepower = 746 watts
Volts don't make power. Watts do. Watts = (volts) x (amps) 1 horsepower = 746 watts (Doesn't matter if the source is AC, DC, or a combination of both.)
4.5~5.3
6 volts
It will take 36 volts to make 12 amps go through 3 ohms of resistance. Ohm's law states that the current in amperes is equal to voltage over resistance.
12 volts DC.
You require about 24 volts to power the windshield wiper.
24 Volts.
If the 100 amps is powered by 10 volts, you have 1 kw, or 1000 watts. watts = volts X current The 'k' simply means kilo, or thousand.
How many volts woud it take to charge a laptop
it doesn't matter how many volts pass through your body, its the amps as little as 0.1 amps can kill a human
In the U.S. 120 volts. <<>> Using the equation E = I x R, Volts = Amps x Resistance = 110 volts.