To calculate the wattage of a 13-amp 3-pin multi-socket, you can use the formula: Watts = Volts × Amps. In the UK, standard voltage is typically 230 volts. Therefore, a 13-amp socket can handle up to 2990 watts (230 volts × 13 amps).
Obviously not. It would blow the bulb by 600W! <<>> Yes you can use a 60 watt light bulb in a lampholder that is rated a 660 watts. The rating given to these lamp holders is the maximum amount of wattage that can be applied to them safely.
Technically speaking a bulb and a lamp are the same thing. You can use a 60 watt bulb in a fixture calling for a 40 watt bulb but I wouldn't. The lighting fixture may get to hot, melt and start a fire.
Yes if it fits. The 40 watts would be an upper limit.
The electrical power that you use from the utility company has to be metered. This is done with a plug in watt meter. The meter socket is what holds the electrical watt meter. It is this meter that the meter reader reads to give you your monthly billing for the electricity that you used.
no because it would blow up because the socket would draw 13 watt not 9 watt
No. It just draws less power.
Obviously not. It would blow the bulb by 600W! <<>> Yes you can use a 60 watt light bulb in a lampholder that is rated a 660 watts. The rating given to these lamp holders is the maximum amount of wattage that can be applied to them safely.
how many amps flow thruogh a 2400 watt appliance plugged into a 120 volt outlet
Technically speaking a bulb and a lamp are the same thing. You can use a 60 watt bulb in a fixture calling for a 40 watt bulb but I wouldn't. The lighting fixture may get to hot, melt and start a fire.
no
Yes if it fits. The 40 watts would be an upper limit.
If the 250 watt bulb is a HID or similar type the ballast comes complete with the fixture. The bulb socket is also part of the fixture and comes pre-wired to the socket. To connect the bulb to the fixture all that has to be done is just screw it into the fixture's socket.
The electrical power that you use from the utility company has to be metered. This is done with a plug in watt meter. The meter socket is what holds the electrical watt meter. It is this meter that the meter reader reads to give you your monthly billing for the electricity that you used.
no because it would blow up because the socket would draw 13 watt not 9 watt
yes the bulb will actually last longer
If the socket threads of the lamp are the same then yes the bulbs can be interchanged. The 5 watt bulb will glow brighter than the 4 watt bulb. If by a 4 watt light you mean a 4 watt fixture, then it is not recommended to place a larger wattage lamp in a fixture that is rated by the manufacturer at a specific operating wattage
First, shut off all power to your house.