no
a 220 volt, 3200 watt oven will draw under 15 amps, so yes a 2o amp breaker will work.
To find out how many amps are needed to support 3200 watts at 240 volts, you can use the formula: Amps = Watts / Volts. Therefore, 3200 watts divided by 240 volts equals approximately 13.33 amps. So, you would need about 13.33 amps to support a 3200-watt load at 240 volts.
They should not be on the same breaker. Micro should be on a 20 amp. Oven should be on a 30 amp by its self.
how many amps flow thruogh a 2400 watt appliance plugged into a 120 volt outlet
1200 Watt wiring is more than enough for an 800 Watt amp. The rating of the sub doesn't make any difference to the cables. If you want to use the sub to its rated power you should get a bigger amp. If the amp can only give out 800 Watts and the sub can take 1100 Watts then you can put a bigger amp on. It is still going to be loud as with an 800 Watt amp. I have a 300 watt amp with a 1200 Watt sub and people hear me coming.
To calculate the wattage of a 13-amp 3-pin multi-socket, you can use the formula: Watts = Volts × Amps. In the UK, standard voltage is typically 230 volts. Therefore, a 13-amp socket can handle up to 2990 watts (230 volts × 13 amps).
Yes, a 1200 watt amp can power a 300 watt box. The wattage of the amp refers to its maximum power output, so it can deliver up to 1200 watts if needed. As long as the amp is set up properly and not pushed to its maximum capacity, it can safely power a 300 watt box.
a watt is power, or 1 joules sec= 1 watt an amp is 6.242 × 1018 electrons passing a given point each second,
Yes, you should have no problems adding this load to a 100 amp service. The NEC recognizes that cooking equipment is rarely loaded to its full potential. You can put this on a 40 amp breaker on # 8 copper wire. The code allows you to treat cooking equipment not over 16000 watts as a 9600 watt load.
Yes the amp can push the 2 subs. I have 2 1250 watt 12inch subs and 1 maybe 400 or 500 watt amp and the amp does fine but if you want more bass at lower levels of volume then you want to have a bigger amp. Just make sure your amp doesnt blow your subs.
Yes, are we talking rms or max? If its rms you will have no problem. well the amp is a 1500 watt max but 350wx1 rms in 4 ohm
That depends on the voltage.