Watts, amperes (amps) and voltage are three aspects of electricity. There are no watts or amps in a volt. Watts are equal to volts multiplied by amperes (watts = amps x volts).
If you consider the equation Watt(W)=Voltage(V)*current(I), you can see the relationship between the watt and volt. That is, in the simplest terms consistent with Ohm's Law, putting this equation in to this form, V=W/I. That is watt(a measure of Power) is directly proportional to voltage. This is the mathematical relationship so there is no watt-amp. FYI Ohm's Law shows the relationship between voltage, current and resistance. E=I*R.
(amendment) Watts are only directly proportional to voltage if the current is independent of voltage, which is unusual. For a resistive load, the current is also proportional to voltage, so W=V x (V/R) or W=V2/R or I2R
Volts and currents are separate measures of electricty.
They are interrelated by the resistance in Ohm's law.
If you specify any two you can calculate the third (although the term "current in a volt" is technically not correct)
You have only specified Zero values.
The correct terminology is How much current will flow when I apply X volts to Y resistance. or something like that.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
you will need 21.81 amps at 220v
The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.
To find amps if watts and volts are known, use the formula; watts / volts = amps or 5000 / 240 = 20.83 amps
6240 watts if it's on a 240 volt circuit. A better answer is to just learn that amps X volts = watts.
watts = volts * amps--> Amps = watts/ volts therefore; 2000/220= 9.09 amps
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
you will need 21.81 amps at 220v
How many Amps is the fridge pulling? Multiply the Amps by the 120V circuit you're plugging into and you'll get your Watts.
The equation that you are looking for is Amps = Watts/Volts. There are 6000 watts in 6kW.
To find amps if watts and volts are known, use the formula; watts / volts = amps or 5000 / 240 = 20.83 amps
6240 watts if it's on a 240 volt circuit. A better answer is to just learn that amps X volts = watts.
Not sure about how many Watts your 36 volt charger uses, but you can find out by this formula... Volts X Amps = Watts.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
On a 120 volt supply, up to 360 watts. On a 240 volt supply, up to 720 watts.
Current (amps) = power (watts) / voltage = 100/240 = 0.42 amps
1000 watts at 9.5AMPS in 120 volt = 4.7 AMPS in 240 volt ..........Divide that by 2 according to the choice of voltage... 500 watts (120V) + 4.7Amp