0
What else can I help you with?
What is the output watts when generator producing 415volts at 800amps load?
To calculate the output power in watts, multiply the voltage by the current. In this case, the output power would be 332,000 watts (415 volts x 800 amps = 332,000 watts).
Convert 15 amps 415v to kw?
To convert 15 amps at 415 volts to kilowatts, use the formula: kW = (amps x volts) / 1000. So, kW = (15 A x 415 V) / 1000 = 6.225 kW.
How many amps will a 3 phase 415 volt 12 kw heater draw?
100 KW divided by 415 volts is 241 amperes. Power = voltage times current, so current = power divided by voltage.
18 ampers 3 phase 415 volts how much kilowatt?
Volts x Amps = Watts, divide with 1000 and you get kilowatts.
What is the colour of 415 volts cable?
The color of a 415 volts cable can vary depending on the specific wiring regulations in place in a particular country or region. In some cases, high-voltage cables such as those carrying 415 volts may be color-coded orange, red, or yellow to indicate their voltage level. However, it's always best to consult local electrical codes and standards for accurate information on cable color-coding.
If volts is 415 watts is 40000 how many amp need?
The answer is 40,000 divided by 415 or 96.38 Amps. Watts is volts times amps.
How many amps needed for a 45kw shredder 415 volt3 phase?
To calculate the required amperage for a 45 kW shredder operating at 415 volts in a three-phase system, you can use the formula: Amps = Power (Watts) / (Voltage × √3). For a 45 kW (or 45,000 watts) shredder, this would be: Amps = 45,000 / (415 × √3), which equals approximately 62.5 amps. Therefore, you would need around 62.5 amps for the shredder.
What is the output watts when generator producing 415volts at 800amps load?
To calculate the output power in watts, multiply the voltage by the current. In this case, the output power would be 332,000 watts (415 volts x 800 amps = 332,000 watts).
How much Ampere when volt 415?
That would depend on the power output (watts) of the circuit. Volts times the Amperage equals the Wattage of the circuit. You do not have enough information in your question. Volts is the force applied to move the electrons in the circuit, and amps are a measure of the quantity of electrons moved through the circuit over time. Thus a circuit of 415 volts and 1 ampere will deliver 415 watt-hours of power. Yet a circuit of 1 volt at 415 amps will deliver the same 415 watt-hours of power, but with less force.
Convert 15 amps 415v to kw?
To convert 15 amps at 415 volts to kilowatts, use the formula: kW = (amps x volts) / 1000. So, kW = (15 A x 415 V) / 1000 = 6.225 kW.
What is the amps for 6000 watts 415 volts 3 phase heater?
There are zero amps in a 6kW 3 phase heater. Amperage is the result of dividing the Watts by the Voltage. A = W/E. Without stating the voltage the heater operates on the amperage can not be calculated.
How many amps will a 3 phase 415 volt 12 kw heater draw?
100 KW divided by 415 volts is 241 amperes. Power = voltage times current, so current = power divided by voltage.
How many amps at 415volt is 80amps at 220volt?
X / 415 = 80 / 220 = 151 amps
What is percent of power loss at 415 volts against 11000 volts?
Power = voltage times current, and the power loss is the loss in the line, I^2 * R. At 11,000 volts, the current will be (11,000 / 415 = ) 3.77% of what it is at 415 volts. So the power loss in the line at 11,000 volts will be (3.77% ^2 = ) .14% of what it is at 415 volts.
How do you calculate current in Star Delta for 10kw 3phase 415 volts induction Electrical Motor?
Since watts = volts times amps times 1.73 times power factor (for a three phase motor): W = E * I * 1.73 * PF Solving for I: I = W / (E * 1.73 * PF) Lets say your motor has a PF of 0.85: I = 10000 / (415 * 1.73 * 0.85) I = 16.39A If this is for your homework (I hope not) and PF is not given, then you will substitute 1.0 for the PF and, of course, arrive at a different answer!
18 ampers 3 phase 415 volts how much kilowatt?
Volts x Amps = Watts, divide with 1000 and you get kilowatts.
What is the current draw of a 7.5 hp 3 phase motor at 415vac?
1 HP=746 watts 15 HP=11,190 watts Ohm's Law says Current (in Amps) = Power (in Watts) divided by Voltage (in Volts) 11,190 watts divided by 415 volts = 26.96 amps. <<>> For a three-phase motor each phase supplies one third of the power, so that is 5 HP on each phase. A 415 v supply has a line-to-neutral voltage of 240 v, and 3730 watts would therefore required 3730/240 amps, or 15.54 amps. However due allowance must be made for (i) the power factor and (ii) the conversion efficiency. This would increase the current by an estimated 20% so the current is therefore estimated to be 19 amps.
