That of course depends on who made the water heater and what model number it is you could always call the manufacturer. Quickest way I know of is to look at the heating elements. They will have a wattage rating. This number is visible when you take the cover or covers off, move aside the insulation and use a flashlite to spy the pesky little rascals.I suggest you shut off the voltage first. My 80 gal has 2 elements of 4500 watts each if I'm not mistaken. All you need to do is multiply the Volts by the Amps and that equals watts
The equation that you are looking for is I = W/E. Amps = Watts / Volts.
On a 20 amp breaker, you can safely operate devices that consume up to 2400 watts (20 amps x 120 volts = 2400 watts). Exceeding this limit can trip the breaker to prevent overheating and fire hazards.
If you are asking about 220 watts, remember Watts equal power, which is Volts times Amps. Amps are used to measure current - how many electrons flow past a certain point per second - so there is no answer to this question. If you meant to ask what current a load of 220 Watts would take if the applied voltage was 110 Volts, the answer is 220 Watts divided by 110 Volts = 2 Amps.
The power (in watts) can be calculated using the formula: Power (W) = Voltage (V) * Current (A). In this case, the power required to run the 3 amp well pump on 220 volts is 660 watts (220 V * 3 A = 660 W).
Power (in watts) is equal to voltage (in volts) multiplied by current (in amperes). Therefore, the number of watts in one amp depends on the voltage. For example, at 120 volts, one amp is equal to 120 watts.
The equation that you are looking for is I = W/E. Amps = Watts / Volts.
10000 watts / 220 volts = 45.4545 amperes
watts = volts x amps, example-2 watts=2 volts x 1 amp, example- 2 watts=120 volts x .60 amp.
On a 20 amp breaker, you can safely operate devices that consume up to 2400 watts (20 amps x 120 volts = 2400 watts). Exceeding this limit can trip the breaker to prevent overheating and fire hazards.
If you are asking about 220 watts, remember Watts equal power, which is Volts times Amps. Amps are used to measure current - how many electrons flow past a certain point per second - so there is no answer to this question. If you meant to ask what current a load of 220 Watts would take if the applied voltage was 110 Volts, the answer is 220 Watts divided by 110 Volts = 2 Amps.
The power (in watts) can be calculated using the formula: Power (W) = Voltage (V) * Current (A). In this case, the power required to run the 3 amp well pump on 220 volts is 660 watts (220 V * 3 A = 660 W).
The formula you are looking for is I = W/E. Amps = Watts/Volts.
Power (in watts) is equal to voltage (in volts) multiplied by current (in amperes). Therefore, the number of watts in one amp depends on the voltage. For example, at 120 volts, one amp is equal to 120 watts.
The answer is 40,000 divided by 415 or 96.38 Amps. Watts is volts times amps.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
Use this formula Amps = Watts/Volts.
1840