The formula for watts is W = A x V. Your system would draw 660 watts to be used in any calculations to find out how much it costs to run the pump.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
To find the current in amps that a 750 watt, 120 volt heater draws, you can use the formula: Amps = Watts / Volts. So, 750 watts divided by 120 volts equals 6.25 amps. Therefore, the heater draws approximately 6.25 amps.
There are no watts to generate volts!! There is a relation that is watts = volts * Amps Generators are set up to generate a specific voltage regardless or watts or amps capacity it has.
To determine how many amps are in 115 volts, you need to know the power (in watts) being used. The relationship between volts, amps, and watts is given by the formula: Watts = Volts × Amps. Therefore, to find the amps, you can rearrange the formula: Amps = Watts / Volts. For example, if you have a device that uses 1150 watts, you would have 10 amps at 115 volts (1150 watts ÷ 115 volts = 10 amps).
These are not convertible quantities. The same way that you cannot convert seconds into pounds. Or pounds into miles per hour. If you reconstituted your question into the form of "I have a device that draws 2 amps at 125 volts, how many Watts is it consuming?" we'd be off to the races. Hope that helps.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
Find the block heater and look for the nameplate on it. It will be in watts. Use the following equation to find the amperage that it draws. Amps = Watts/Volts. The voltage to use for the truck will be 12 volts.
Power = Volts * current [p = E*I]; 120volts*10amps = 1200watts
volts times amps = watts
amps equals watts divided by volts.
First you need to find out how many amps the heater draws. Then use this formula: Volts (220) X Amps = Watts Then take: Watts x 3.41214 = Btu/hr
Watts and Volts are two distinct types of measurement.
Amps, volts and watts are interrelated, but you need to do a little math. Amps * Volts = Watts
Watts are a unit of power and Volts are a unit of electric potential, so they cannot be directly compared. However, Watts and Volts can be related byWatts = Volts * AmperesorWatts = (Volts^2) / Ohmswhere Amperes are a unit of current and Ohms are a unit of resistance. So, for example, if a lightbulb draws .333 Amps of current at 120 Volts, it is a 40 Watt bulb. (.333 A * 120 V = 40 W)
The power required is(6) times (the amperes of current the radio draws when it operates) watts.
The formula is volts times amps equals watts, or watts divided by volts equals amps.
Zero. Watts is the product of Amps x Volts. As you can see an amperage value is needed. Voltage = Watts/Amps. Volts = 200/? 20 volts