Assuming resistive load, 0.125 amps.
To convert watts to volts, you need to know the current in amperes (A) because the formula is Watts = Volts × Amperes (W = V × A). Without the current value, you cannot directly convert 310 watts to volts. If you have the current, you can rearrange the formula to find volts: Volts = Watts / Amperes. For example, if the current is 10 A, then 310 W would be 31 volts (310 W / 10 A = 31 V).
To calculate the current, you can use the formula: Current (I) = Power (P) / Voltage (V). In this case, 60 watts divided by 120 volts equals 0.5 amperes. Therefore, a device operating at 60 watts on a 120-volt circuit would draw 0.5 amps of current.
To find the current, use the formula: Power (W) = Voltage (V) x Current (A). Rearrange the formula to solve for current: Current (A) = Power (W) / Voltage (V). Therefore, 160 watts divided by 120 volts equals 1.33 Amps.
Amps (current) times volts = watts. so watts divided by volts = current (Amps). i.e.- 0.5 Amps.
To calculate the watts in 16kV, you would need to know the current flowing through the circuit. The formula to calculate watts is Watts = Volts x Amps. Without the value of current (Amps), we cannot determine the watts.
Watts = Amps x volts. What is the current draw and voltage of the calculator.
240 watts at 120 volts requires 2 amperes. Power = voltage * current
To get Watts you multiply Amps x Volts. So in your case you just do some reverse math and divide the Watts by the volts and you get your amperage. so 100/120=0.83 Amps
To calculate the current, you can use the formula: Current (I) = Power (P) / Voltage (V). In this case, 60 watts divided by 120 volts equals 0.5 amperes. Therefore, a device operating at 60 watts on a 120-volt circuit would draw 0.5 amps of current.
Watts = Amps * Volts Watts = 20 amps * 100 Volts Watts = 2000 2,000 Watts or 2k Watts
Watts = Amps * Volts Watts = 20 amps * 100 Volts Watts = 2000 2,000 Watts or 2k Watts
To find the current, use the formula: Power (W) = Voltage (V) x Current (A). Rearrange the formula to solve for current: Current (A) = Power (W) / Voltage (V). Therefore, 160 watts divided by 120 volts equals 1.33 Amps.
Amps (current) times volts = watts. so watts divided by volts = current (Amps). i.e.- 0.5 Amps.
To calculate the watts in 16kV, you would need to know the current flowing through the circuit. The formula to calculate watts is Watts = Volts x Amps. Without the value of current (Amps), we cannot determine the watts.
Often CFLs are marked with the current. If not, find out the watts and the volts. Divide the watts by the volts to find the current, then double the current because the power factor could be as low as 0.5 with CFLs. That will tell you a safe value to use for the current when planning the wiring.
The device consumes 84 watts of power. This can be calculated by multiplying the voltage (12 volts) by the current (7 amps). So, 12 volts x 7 amps = 84 watts.
There really is no fixed answer. Amps are a measure of current, while watts are a measure of work. To get the answer, you need to know either how many volts you are dealing with, or how much resistance; the relationship is W= V*I (where I is the current in amps). That said, for a typical 120 volt household current, the number of watts would be 180.