If you mean an alternator as used in cars, the main current-carrying winding is the stator, and the armature (rotating part) only carries the current needed to set up the magnetic field. In that way an alternator is inside-out compared with some other types of electrical machine.
The advantage of an alternator is that it uses slip-rings instead of a commutator and you have two slip rings connected by brushes to carry the relatively small current from the voltage regulator to the armature coil so that the alternator generates the right voltage at all speeds. This arrangement ensures a long brush life and high reliability.
The main coil (stator) produced 3-phase ac which is connected via a full-wave rectifier with six diodes directly to the battery. It is also connected to another rectifier that produces a secondary dc circuit that feeds the voltage regulator. When the engine is not running, current flows through the ignition light from the battery to the secondary dc circuit, so it glows when the ignition is switched on and goes off as soon as the engine runs up.
If the voltage is great enough a current will flow.
If no current flows through a load, then no energy is received by the load. Energy is transferred through the flow of current, so without any current, there is no energy transfer to the load.
It can.Electricity, both static and current, flows through coins quite easily.
When too much current flows through a conductor, it is called an overload. This can lead to overheating and may damage the conductor or the connected equipment if not addressed.
Electrical energy is converted into light and heat when electric current flows through the metal filament of a light bulb.
Current flows through a complete circuit.
When an electrical current flows through a wire it creates what is called an Electro Magnetic Field.A magnetic field is create when an electric current flows through a wire.
True
according to kcl the current flows through a wire
True
A transformer relies on AC current flowing through the primary to set up changing magnetic fields in the core. The field flows through the core and in to the secondary of the transformer, generating an AC current. The current must be AC, otherwise the magnetic field in the core of the transformer will saturate. In the same way, the armature of a dynamo or alternator must be moving in order to create a changing magnetic field to create current through the windings.
The stream of water which flows like a river through the ocean is a current. The Gulf Stream is the most significant such current which flows from the tropics to the northern latitudes.
Current flows in loops, voltage drops across elements. With relation to current, what flows in, must flow out, so no, current is not dropped across a resistor, it flows through a resistor and voltage is dropped across the resistor.
A magnet created when electric current flows through a coil of wire is called an electromagnet.
No current flows when the the voltage is zero.
Alternating current flows through a flat iron.
Electric energy flows through a wire when an electric current passes through it.