18,000 J
It takes 60 watt-hours. Same as lighting a 1-watt bulb for 60 hours; or 60 bulbs of 1 watt each for 1 hour. You get the idea.Notice the units: watt-hours, not watts. Watt is a unit of power, watt-hour is a unit of energy. 1 watt-hour = 0.001 kWh (kilowatt-hour) = 3600 joules = 860 calories = 3.4 BTU.
The power rating of a light bulb is measured in watts (W), which represents the amount of electrical energy it consumes per unit of time. If a light bulb has a power rating of 60 watts (for example), it means it consumes 60 watt-hours of energy in one hour of operation.
Actually, your wrong. Sure, the lighting ithat is set for proper illumination is 60watts, but if anyone is used to using a dimmer, you can dial down the power consumption for a typical incandescent bulb and it will still light. And as expected, the light level will decrease as you lower the dimmer setting as well.
A Watt is a Joule per second. Joules measure energy and Watts measure power, which is the rate of energy used. Therefore, if you use a 60 Watt light bulb for 10 seconds, you consume 600 Joules.
A 150 watt light bulb consumes 150 watts of energy per hour when it is turned on.
18,000 J
It takes 60 watt-hours. Same as lighting a 1-watt bulb for 60 hours; or 60 bulbs of 1 watt each for 1 hour. You get the idea.Notice the units: watt-hours, not watts. Watt is a unit of power, watt-hour is a unit of energy. 1 watt-hour = 0.001 kWh (kilowatt-hour) = 3600 joules = 860 calories = 3.4 BTU.
The power rating of a light bulb is measured in watts (W), which represents the amount of electrical energy it consumes per unit of time. If a light bulb has a power rating of 60 watts (for example), it means it consumes 60 watt-hours of energy in one hour of operation.
Power = Energy/time 100W=Energy/360 Seconds Energy = 100/360 Energy ≈ 0.27 Joules
Simple 10,000 hours cause it completes 1 unit in 10 hours.....
Actually, your wrong. Sure, the lighting ithat is set for proper illumination is 60watts, but if anyone is used to using a dimmer, you can dial down the power consumption for a typical incandescent bulb and it will still light. And as expected, the light level will decrease as you lower the dimmer setting as well.
The average home fluorescent lamp consumes 40W of power. Running for one hour it will consume 0.04 KWh. Units of electricity are charged per Kilowatt hour.
A Watt is a Joule per second. Joules measure energy and Watts measure power, which is the rate of energy used. Therefore, if you use a 60 Watt light bulb for 10 seconds, you consume 600 Joules.
A 75 watt light bulb consumes 75 watt every hour if left on continuously. You electric company charges by the kilowatt hour. So since 75 watts = .075KW x 48 hours you would use 3.6 KWhrs. If you are paying about 12 cents per KWhr it would cost you about 42 cents.
electircal or photo electrical energy. Photons are shot across from panel to another panel this sparking back and forth creates the light you see.Answer: Electricity is the energy input into a light bulb. It either heats afilamanet to produce heat and light, r excites the gas contained in the bulb (in flluorescent tube) to emit visible light directly or emit UV light which interacts with a phosphor coating in the tubes to emit light.
it will take more than100 watts until the filament reaches operating temperature so perhaps a second to get as low as 100 watts . then 100Watts there after until 300 hours pass then 0 watts if you mean 100Watt hours then the answer is 1 hour and the hour will cost about a penny