5.o molar
50 meters converts to 0.05km
1.5 hectares.
A twin size bed is typically 1 meter wide and 2 meters long.
The actual length of the field would be 5000 cm or 50 meters. This is found by multiplying the scale (1:1000) by the length of the field on the map (5 cm).
The Isle of Man's incinerator's chimney stack is 70 meters high. Its footprint is roughly 50m wide and 200m long.
To calculate the osmolarity of a solution containing 50mM of glucose, you'll need to consider the number of particles in solution. Glucose does not dissociate into multiple particles in solution, so its osmolarity is equivalent to its molarity. Therefore, the osmolarity of a 50mM glucose solution would be 50 mOsm/L.
In a 50m pool, a 100m swim would require 2 laps. Each lap is 50m, so swimming two laps would cover a total distance of 100m. Swimmers would start at one end of the pool, swim to the other end (50m), turn around, and swim back to the starting point (another 50m) to complete the 100m swim.
The straight would be 50m.
Over-specification is where there is too much information about what size somethign is or how do or make something. For example a piece of rope that is to be cut in half.Correct specification would read: Rope length 50m, cut at 20m from the left.Over-specification would read would read: Rope length 50m, cut at 20m from the left and 30m from that right. In this case "30m from the right" is too much and can be computed from what was said before. It is rather dangerous because designers tend to update specification at the specific part sub part without considering the whole. This can lead to serious problem when the original updater isnt present to confirm the correct spec. Eg Consider what would if we need 5 more meters on the left piece and someone updated the spec badly. The overspecificed version would read. Rope length 50m, cut at 25m from the left and 30m from that right. ... which is simply not possible, and creates a problem figuring out which number was updated and which is correct.
what velocity is a taint by an object that is accelerated at .3om/s for the distance of 54m if its initial velocity is 50m/s
because it is a 50m pool, so one lap is 50m. that's why everything is a 200, 400, nothing has a 50 in it
1km = 1000m 1km > 50m 1km is bigger
It's 50m x 50m
100m x 50m=5000m2
It would have to be no lower than $20M to $50M, perhaps as high as $100M.
I think the fastest swimming technique is using your hands and your feet at the same time so the movement of your body helps you go faster through the water.
1m = 39.370078740 inches so 50m = 50 * 39.370078740 = 1968.50 inches.