0
What else can I help you with?
What cannot be used with sulphuric acid to prepare zinc sulphate?
Zinc oxide cannot be used with sulphuric acid to prepare zinc sulphate. This is because zinc oxide is insoluble in sulphuric acid, and therefore, it would not react to form zinc sulphate.
How do you prepare Na3BO3?
To prepare sodium borate (Na3BO3), you would typically dissolve boric acid (H3BO3) in sodium hydroxide (NaOH) solution, followed by evaporation of water to yield the solid sodium borate. Care should be taken during the process as boric acid is a mild irritant and sodium hydroxide is caustic.
Is it possible to prepare sulfanilamide from sulfanilic acid?
When you attempt to prepare sulfanilamide from this reagent, a polymeric product is produced after the addition of PCL5 in step one. So no, this is not typically a reaction used to prepare sulfanilamide.
Calculate the amount of salicylic acid needed in 1 percent ointment that will be 15 g in size?
To prepare a 1% salicylic acid ointment that is 15 g in size, you would need 0.15 g of salicylic acid. This is calculated by multiplying 15 g by 0.01 (1%). Therefore, 0.15 g of salicylic acid would be required for the preparation.
How can we react dehydrating agent with acetic acid?
Dehydration of acetic acid to prepare acetic anhydride occur at 8oo oC.
What acid is used to prepare potassium chloride?
2K + 2HCl -> 2KCl + H2 hydrochloric acid would do here.
Calculate the required amount of oxalic aciddihydrate to prepare 200 mL of 0.50M oxalic acid solution?
To prepare 200 mL of 0.50M oxalic acid solution, you would need 0.1 moles of oxalic acid. Since oxalic acid is a dihydrate (H2C2O4·2H2O), you would need to account for the water content. The molar mass of oxalic acid dihydrate is 126.07 g/mol, so you would need 12.607 grams of oxalic acid dihydrate to prepare the solution.
How many grams of sulfosalicylic acid are required to prepare 1 liter of 3 solution?
To prepare a 3% solution of sulfosalicylic acid, you would need 30 grams of sulfosalicylic acid for every 1 liter of solution.
What cannot be used with sulphuric acid to prepare zinc sulphate?
Zinc oxide cannot be used with sulphuric acid to prepare zinc sulphate. This is because zinc oxide is insoluble in sulphuric acid, and therefore, it would not react to form zinc sulphate.
How do you prepare fatty acid from tartaric acid?
reduction
How do you prepare 50 mM Sulphuric acid solution?
To prepare a 50 mM Sulphuric acid solution, you would need to calculate the required volume of concentrated Sulphuric acid (typically 96-98%) needed to dilute in water to achieve the desired concentration. You can use the formula: C1V1 = C2V2, where C1 is the concentration of the concentrated acid, V1 is the volume of concentrated acid needed, C2 is the desired concentration (50 mM), and V2 is the final volume of the solution you want to prepare.
How do you prepare 1normal sulphuric acid?
To prepare 1M sulfuric acid (H2SO4), you would need to dilute concentrated sulfuric acid with water carefully while stirring. Do this by adding the concentrated acid slowly to water, never the other way around, to prevent violent splattering. Always handle concentrated sulfuric acid with extreme caution, as it is highly corrosive.
How do you prepare 0.1Molar thiobarbituric acid?
To prepare a 0.1M solution of thiobarbituric acid, you would need to weigh out the appropriate amount of thiobarbituric acid powder and dissolve it in the appropriate volume of solvent, typically water. The formula weight of thiobarbituric acid will be needed to calculate the amount required. Additionally, remember to use appropriate safety precautions as thiobarbituric acid can be harmful if mishandled.
How do you prepare project report of monochloroacetic acid?
how to prepare project report of monochloroaceticacid?
How prepare 0.1 N oxalic acid?
To prepare 0.1 N oxalic acid solution, you would need to dissolve 0.634 g of oxalic acid dihydrate (H2C2O4·2H2O) in distilled water and make up the solution to a final volume of 1 liter. This will give you a 0.1 N (normality) solution of oxalic acid.
Will 3g in 100ml prepare 3 sulfosalicylic acid?
To prepare a 3% solution of sulfosalicylic acid in 100ml, you would need to dissolve 3g of sulfosalicylic acid in enough water to make a total volume of 100ml. Stir thoroughly until the powder is completely dissolved to ensure a uniform solution.
How to prepare 0.5M sulfuric acid?
To prepare 0.5M sulfuric acid, you would mix concentrated sulfuric acid with water in the correct ratio. For example, to make 500 mL of 0.5M sulfuric acid, you could mix 25 mL of concentrated sulfuric acid with 475 mL of water. Always remember to add acid to water slowly to avoid splashing and heat generation.
