Use a magnet to remove the iron, then pour what is left into water. The sugar should dissolve. pour the solution through a sieve to remove the sand and gravel. A fine sieve can be used to separate the gravel and sand.
For the iron fillings, you would use a magnet.
For the sand and sugar, I'm pretty sure there's no easy way to do it besides manually.
A magnet will cause the iron to adhere and separate. Or adding water will dissolve the sugar and the iron can be filtered out and then the water evaporated from the sugar.
This would be a mixture, because you could easily separate the water and sugar again by boiling the water.
You could place the sugar-clay mixture in a wire-mesh sieve, and rinse the mixture with water to dissolve the sugar and remove it from the clay. You would need to do this over a container that would collect the sugar water. Once the sugar is completely dissolved, you could evaporate the water from the sugar water, leaving the sugar behind. The clay would be left behind in the sieve.
Sugar is a compound. It consists of several different elements depending on the type of sugar. A compound is formed by a chemical reaction and cannot be separated. You can't separate sugar into other substances physically.
The process that would be most appropriate to separate a mixture is filtration. This only applies if the mixture is composed of a solid and a liquid.
A magnet will cause the iron to adhere and separate. Or adding water will dissolve the sugar and the iron can be filtered out and then the water evaporated from the sugar.
To separate out the iron fillings, run a magnet over the mixture of iron fillings, sand and water. As iron is a magnetic material, it will stick to the magnet thus allowing you to take it out. Then, run the mixture over a filter funnel with filter paper. After the filtration, the filtrate would be water and the sand would be stuck on the filter paper.
This would be a mixture, because you could easily separate the water and sugar again by boiling the water.
water and a magnet
You could try running water through it (which would dissolve the sugar), collecting the water, and evaporate it to get the sugar back.
you cant it just separate one another still contain it though
the correct answer would be -( magnetic attraction of one part )
You could place the sugar-clay mixture in a wire-mesh sieve, and rinse the mixture with water to dissolve the sugar and remove it from the clay. You would need to do this over a container that would collect the sugar water. Once the sugar is completely dissolved, you could evaporate the water from the sugar water, leaving the sugar behind. The clay would be left behind in the sieve.
well, i think you lick it. The salt tastes salty, and the sugar tastes sweet. Isn't that simple?
you would use the iron's magnestism to extract it with a magnetic tube
Using a magnet would be the easiest way.
The iron fillings are attracted by the magnet and separated from the sulphur powder.