0
If the volume of the sample of pyrite equals the volume of the sample of gold how many?
If the volumes of the samples of pyrite and gold are equal, you cannot directly determine the number of samples without knowing the specific mass or density of each material. Pyrite has a lower density (about 5 g/cm³) compared to gold (about 19.3 g/cm³), meaning that for the same volume, a sample of gold would weigh significantly more than a sample of pyrite. Therefore, while the volumes may be equal, the mass of gold will be greater than that of pyrite.
What else can I help you with?
The density of gold is 19.3 g cm3 The density of iron pyrite is 5.0 g cm3 If a nugget of iron pyrite and a nugget of gold each have a mass of 50 g what can you conclude about the volume of each nugget?
The nugget of gold has a volume of 2.6 cm3, and the nugget of pyrite has a volume of 10 cm3.
How much money is fools gold worth?
It depends. Pyrite (or "fool's gold) is a mineral that can contain 0.25 percent or more of gold. If a pyrite sample contains this amount, and assuming the price of gold is $1500 per troy ounce, then one ton of pyrite would be worth a little over $100,000.
Sometimes called fools gold?
Pyrite is sometimes called fool's gold because of its metallic luster and pale brass-yellow hue, which can resemble real gold to the untrained eye. However, pyrite is a different mineral with a lower value and hardness compared to gold.
What is real name of fools gold?
The scientific name is Iron Pyrite. Crushed Iron Pyrite is Greenish Brown and Real gold crushed is gold colored. Iron pyrite, a mineral composed of iron sulfide, FeS, is called fool's gold because it has the appearance (but no other properties) of gold.
What are facts about pyrite?
Pyrite is a mineral known as "fool's gold" due to its gold-like appearance. It is composed of iron and sulfur, with the chemical formula FeS2. Pyrite can be found in a variety of environments, including sedimentary rocks and hydrothermal veins.
How did early prospectors use density to determine whether they had found gold or pyrite?
Early prospectors used density to determine whether they had found gold or pyrite by comparing the weight of the mineral sample to its volume. Gold has a higher density than pyrite, so a sample of gold would feel heavier for its size compared to a sample of pyrite. By calculating the density of the sample using the formula density = mass/volume, prospectors could determine if they had found gold or pyrite based on the density value obtained.
How much lighter is pyrite than gold?
In fact, pyrite is heavier than gold. I'm not sure exactly, but I believe it is anywhere from 5% to 20% heavier than gold of the same volume.
The density of gold is 19.3 g cm3 The density of iron pyrite is 5.0 g cm3 If a nugget of iron pyrite and a nugget of gold each have a mass of 50 g what can you conclude about the volume of each nugget?
The nugget of gold has a volume of 2.6 cm3, and the nugget of pyrite has a volume of 10 cm3.
Can gold and pyrite be distinguished by color?
Mostly, yes. Gold has a deep yellow colour, while pyrite often has a silvery haze over it. If you have a large sample, it's even easier, as pyrite forms perfect cubic crystals.
Is fools gold worth money?
It depends. Pyrite (or "fool's gold) is a mineral that can contain 0.25 percent or more of gold. If a pyrite sample contains this amount, and assuming the price of gold is $1500 per troy ounce, then one ton of pyrite would be worth a little over $100,000.
Which physical property did prospectors use to tell the difference between iron pyrite and gold?
Prospectors used the physical property of density to differentiate between iron pyrite and gold. Gold is denser than iron pyrite, so prospectors could use the weight of a sample to determine whether it was more likely to be gold or iron pyrite.
If a nugget of iron pyrite and a nugget of gold each have a mass of 50gwhat can you conclude about the volume of each nugget?
Since the density of gold is higher than that of iron pyrite, the gold nugget will have a smaller volume than the iron pyrite nugget. This is because for two materials with the same mass, the denser one will occupy less space.
What mineral property can be used to distinguish between pyrite and chalco pyrite?
Pyrite also known as "fool's gold" is a mineral that has both a different chemical, morphological and physical characteristics than gold. Gold is denser (i.e. the same size of gold is much heavier than the that of pyrite). Gold's average density is 17.64 g/cm3 while Pyrite's density is on average 5.01 g/cm3. The chemical formulas are different. Gold's chemical formula is "Au" while Pyrite's is and iron sulfate mineral with a formula of "FeS2". The color is also different, gold appears the color of gold while pyrite is more bronze in color. The crystallographic form of the minerals also vary. Gold is a very soft mineral while Pyrite is much harder (gold has a hardness of 2.5 while Pyrite is 6.5). To distinguish between a sample of each, you could scratch the surface of gold using your fingernail which you would not be able to do with pyrite. You can try to scratch it because pyrite or fools gold much harder then gold so if it doesn't scratch that much it is most likely pyrite or fools gold. You can tell them apart by looking at their reflection and streak. Also, gold is much more dense than pyrite, so the same volume would 'weigh' about 3.5 times more. Gold has a hardness of about 2.5, while pyrite is about 6 (Gold is softer and more malable). Streak is used to distinguish between Gold and Pyrite.
What mineral is sample f on gizmo's?
Sample F on the Gizmo is pyrite, a common mineral known for its metallic luster and golden color. It is also known as "fool's gold" because of its resemblance to real gold.
If a nugget of iron pyrite and a nugget of gold each have a mass of 50 g what can you conclude about the volume of each nugget?
Agreed with your correspodent 'Answer Bot'. However, do not be 'fooled' by iron pyrites'. It is known as 'Fool's Gold' , because its coloiur is very similar to Gold. However, Gold has a rounded form , whereas Iron Pyrites has a more angular form .
Is Iron pyrites magnetic?
No. ----------- Well, maybe and maybe not. Not ALL pyrite is magnetic, but some is. That said, Iron Pyrite, or fool's gold, can be tested for by a malleability test. Using a pin, or a pocket knife, try to cut or 'stab' the sample in question. If it bends to the point or blade, it is most-likely gold. If it shatters or breaks, it is most-likely either Iron Pyrite or Mica. In 20-years of hobby-prospecting, the pocket-knife test is the best. That, and visually inspecting in direct sunlight where possible. Gold will have luster in and out of direct sunlight. Iron Pyrite will not display luster out of direct sunlight. Final test for Iron Pyrite is Specific Gravity. Gold is 19.3, while Iron Pyrite is 5 (+/-0.1). With a pan, you can easily differentiate Iron Pyrite from Gold by stratification in a soil sample.
What is an antonym for pyrite?
An antonym for pyrite could be "gold," as pyrite is often referred to as "fool's gold" due to its resemblance to real gold.
