0
In an electromagnet what are the springy pieces of metal or carbon that makes contact with the commutators contacts?
brushes
What else can I help you with?
What are the springy pieces of metal or carbon that make contact with a commutator's contacts?
Those are called brushes. They are used to conduct electric current between stationary wires and rotating parts in an electric motor or generator. The brushes are typically made of carbon or metal alloys to ensure good electrical contact and minimize wear on the commutator.
What texture does the raising agents give?
It makes the product light and fluffy and springy and airy.
Why are some outlets upside down?
Are you asking about a standard USA 120 Volt domestic wall socket containing a pair of outlets, where one outlet is positioned below the other one but looks upside down? If so, here goes:Each pair of socket outlets is made like this: a springy brass contact strip is fitted underneath the top outlet's left hole to connect it to the bottom outlet's left hole. Another springy brass contact strip is fitted underneath top outlet's right hole to connect it to the bottom outlet's right hole.One supply wire is connected to the left-hand contact strip and the other supply wire goes to the right hand contact strip.It doesn't actually matter which outlet hole is the hot and which is the neutral because the system allows you to put in an ungrounded plug either way round.If there are any ground holes these are positioned above and below each pair of the contacts described above, at the mid-way point. The top outlet's 3 holes then look like one triangle and the bottom outlet's 3 holes look like another triangle that is upside down to the top one!Another answerThe NEC does not specify what position a duplex receptacle is placed. However, some electrical plans, such as those for hospitals, may call that receptacles be placed with the ground hole facing up. This is to help prevent contact being made with the hot and neutral with something falling on a plug of a cord. The ground prong may help protect this from happening.The other school of thought is that with the ground hole facing down on a duplex receptacle if the plug of the cord has something fall on it the last blade to disengage would be the ground pin.Another explanationReason why "ground-down" is best/safer: the socket for the ground pin should be down because, if the plug starts to work its way out from weight on the cord, the first things to disconnect will be the power pins and that all-important ground pin will be the last to go, thereby providing its protection until no longer needed because the power pins have been disconnected first.
What do tendons feel like?
A tendon basically feels like a tough band like a rubber band but stronger. When the tendon is torn inside the body, the area will feel hot and most likely swollen.
What type of material is inside the holes in the outlet?
Inside the "holes" are springy brass fingers that grip the plug prongs when you insert the wall plug, making connection with your home's electrical system.
What are the springy pieces of metal or carbon that make contact with the commutators contacts in an electromagnet?
brushes
In an electromagnet what are the springy pieces of metal or carbon that make contact with the commutators contacts?
These springy pieces are called brushes. They conduct current between stationary wires and moving parts in the electromagnet, ensuring continuous contact with the commutator's contacts as it rotates.
In an electromagnet what are the springy piece of metal or carbon that make contact with the commutators contact?
brushes
In an electromagnet what are the springy pieces of metal or carbon that make contact with the commutator's contacts?
The springy pieces of metal or carbon that make contact with the commutator's contacts in an electromagnet are known as brushes. Brushes are responsible for delivering electrical current to the commutator, allowing the electromagnet to function as intended.
What are the springy pieces of metal or carbon that make contact with the commutator's contacts?
It's a small block of graphite. The graphite acts as both the electrical contact to the commutator and as a lubricant to reduce drag and wear.
What are the springy pieces of metal or carbon that make contact with a commutator's contacts?
Those are called brushes. They are used to conduct electric current between stationary wires and rotating parts in an electric motor or generator. The brushes are typically made of carbon or metal alloys to ensure good electrical contact and minimize wear on the commutator.
Where do you get springy shoes on fantage?
If you have the limited pet Springy you can go to the pet locked items and click springy then you can obtain the shoes.
What type of cartilage is the most springy?
Elastic cartilage is the most 'springy' its not very common in the human body except the ears.
How do you get springy poles on poptropica?
you dont
What are the characteristics of a yo-yo?
springy
What rhymes with stringy?
Springy Thingy Dinghy
Can hard things be springy too?
Yes.
