was a lojack system also installed as a dealer option.
The 1991 Acura Legend likely uses R-12 freon refrigerant in its air conditioning system, as it was a common refrigerant at that time. However, R-12 has been phased out due to its environmental impact, so it may have been replaced with a more environmentally friendly refrigerant like R-134a during a retrofit. Check with a professional mechanic to confirm the type of refrigerant in your particular vehicle.
To tighten the tension bolt on a 1991 Acura Integra, turn it clockwise. This will help apply tension to the belt and ensure it stays in place properly. Be sure to consult your vehicle's manual for specific instructions and torque specifications.
This happened to me in a car I used to have. My mechanic drilled two small holes on each side of the headlight glass/plastic. It took a while, but the moisture dissipated and didn't come back.
Has your timing belt been changed? From what I understand, the car automatically turns on the light every 60,000 miles (the recommended interval between timing belt changes). I changed mine well after the light came on (it came on while the previous owner still had it) and the belt was long overdue. Also, when you do change it, you have to manually reset the light.
The only difference is in length of the filter which is 1/2 inch longer. The PH6607 and PH7313 have the same size threading so I would go with the bigger (PH7313) if you have the space otherwise for smaller (PH6607) should be used. They both do the same job. Hope this helps.
it's possible to change trip computer display for navigation system in Acura MDX 2002?
Acuranavi.com
Acuranavi.com
You can find replacements at www.navhelp.com
How to reset Navigation 2009 Acura TSX
To reset the navigation system in a 1999 Acura RL, start by turning on the vehicle and allowing the navigation system to initialize. Then, press and hold the "Menu" button until the system prompts you with options. Select the option to reset or restore factory settings, and confirm your choice. This process will erase any saved destinations and preferences, restoring the system to its original settings.
To obtain the navigation code for a 2004 Acura MDX, you can check the owner's manual, where the code is often written on a card. If it's not there, contact an Acura dealership with your vehicle's VIN; they can provide the code after verifying ownership. Alternatively, if you have the original navigation system, you may find the code displayed on the screen after entering the wrong code multiple times.
When a 1997 Acura RL displays an "Enter Code" screen on the navigation system, it typically indicates that the anti-theft feature has been activated. This happens when the battery is disconnected or the system detects a power interruption, prompting the need for a security code to unlock the navigation system. Owners can usually find the code in the owner's manual or on a card provided at the time of purchase. Entering the correct code will restore functionality to the navigation system.
To change the clock on a 2004 Acura TSX with the navigation system, start by pressing the "Menu" button on the navigation screen. Select "Settings," then navigate to "Clock Settings." From there, you can adjust the time by selecting "Set Time" and using the touchscreen to input the correct hour and minute. Finally, confirm your changes to set the new time.
To program navigation in an Acura MDX, first ensure the vehicle is in park and the ignition is on. Access the navigation system by pressing the "Navigation" button on the dashboard. Use the touchscreen to input your destination by selecting "Destination," then "Address" or "Points of Interest," and follow the prompts to enter the necessary details. Once you've entered the destination, confirm it to start the route guidance.
In a 2008 Acura MDX, the navigation (navi) serial number can typically be found on the navigation DVD case or on the navigation system's screen itself. To access it via the screen, turn on the navigation system, go to the "Settings" menu, and select "About." The serial number should be displayed there. If you have the original navigation DVD, the serial number is printed on the back of the disc as well.
To unlock the navigation system on a 2001 Acura MDX, you typically need to enter a specific code that is provided with the vehicle's original documentation or can be obtained from an Acura dealership. If you don't have the code, you may need to provide proof of ownership to the dealership for assistance. It's important to follow the manufacturer's guidelines to avoid any potential issues.