Sure, it's fine. I think the people in the Hookah places use butane lighters themselves.
Butane is commonly used in lighters to create a blue flame. You can use butane in a regular lighter, but for a more consistent blue flame, you might want to use a torch lighter that is specifically designed for butane. These lighters typically have higher pressure and produce a more intense flame.
To refill a vintage Stratoflame lighter, you will need a can of high-quality butane fuel. Make sure to use filtered butane to prevent clogging the lighter's internal components. Refill the lighter in a well-ventilated area and follow the manufacturer's instructions for proper refilling technique.
Refilling butane lighters can be dangerous if not done properly. It is important to use the correct type of butane fuel, do not overfill the lighter, and make sure there are no open flames nearby. It is also recommended to refill lighters in a well-ventilated area to avoid inhaling the butane gas.
Its a 9v battery sold by WIN FACTORY SERVICE for $2.75......... WIN FACTORY SERVICE Regina Heller Plaza 18324-2 Oxnard Street Tarzana, California 91356
Most modern lighters use butane. It is liquid under pressure but vaporizes when released. Butane lighters have no wick and make a slight hissing sound when in use. Lighters with a wick use a liquid fuel that is naphtha-based.
Dunhill lighters typically use butane gas as fuel to produce a flame. You can refill the lighter with butane gas when it runs out to continue using it. Make sure to use high-quality butane gas to ensure proper functioning of the lighter.
you can fill a butane lighter with lot's of things but you only want to use butane or (only if you have an adjustable lighter) propane. some of my freinds tried Ethane and they could either get it to burn a lighter up or it wouldn't light so it's hard to balance if you use that. I PLAY WITH FIRE :)
Butane is commonly used in lighters to create a blue flame. You can use butane in a regular lighter, but for a more consistent blue flame, you might want to use a torch lighter that is specifically designed for butane. These lighters typically have higher pressure and produce a more intense flame.
No, lighter fluid and butane are two different substances used in lighters. It is important to use the correct fuel for your specific lighter to avoid accidents.
It is not recommended to use colored butane in ST Dupont lighters, as it could potentially damage the lighter's mechanisms. Stick to using high-quality, triple-refined butane to ensure optimal performance and longevity of your lighter.
Butane will only stay a liquid under pressure. NORMAL lighters keep it in a sealed container so it only evaporates when the trigger is pressed. Zippo lighters are NOT sealed and even if they had a way to inject butane, it would all flow out the top. Zippos require a fuel that is a liquid at room temp and evaporates a little at a time so the sparks will ignite the gas. Zippo does produce a special butane lighter, however.
To refill a vintage Stratoflame lighter, you will need a can of high-quality butane fuel. Make sure to use filtered butane to prevent clogging the lighter's internal components. Refill the lighter in a well-ventilated area and follow the manufacturer's instructions for proper refilling technique.
Use can use any naptha lighter fluid in a Zippo. This may not be what you would identify as "normal," however; the more modern Bic lighter and many others use butane. Butane absolutely won't work in a Zippo. I'm not sure what would happen, but it could be anywhere from not working at all to a fiery explosion.
BUTANE FILLING PREMIUM BUTANE IS REQUIRED TO INSURE OPTIMUM PERFORMANCE Of YOUR LIGHTER! LIGHTERS REQUIRE THE CLEANEST BUTANE AVAILABLE AT A PRESSURE OF 45 PSI. RECOMMENDED PREMIUM BUTANE BRANDS ARE PACKAGED IN (10-13 oz.) CANS WITH A METAL FILL TIP NOZZLE. NON-PREMIUM BUTANE (CLIPPER, RONSON, SUN) AND BRANDS WITH PLASTIC FILL TIP NOZZLES ARE NOT RECOMMENDED FOR IGNITION LIGHTERS AS THEY MAY CAUSE INCONSISTENT IGNITION AND PERFORMANCE. # You may be inclined to shake the butane can before using. NEVER do this, even though some websites actually say you should. Shaking adds too much propellant to the fuel and can result in accidents. # Fill with lighter in upside down position. # Put nozzle tip directly on valve opening and press down firmly for 4-5 seconds. # Butane spray back may occur with some lighters when tank is full.If the lighter is not equipped with a butane level window, use the following steps to ensure tank is full:a. Hold lighter in upside down position.b. Depress the filler valve with a small screwdriver. If liquid is expelled from the valve, stop immediately; the tank is filled to maximum capacity. # Warm the lighter in your hand for at least 30 seconds. Wait an additional 2 minutes before attempting to ignite the lighter. This allows enough time for excess butane to dissipate and the gas in the lighter to reach room temperature. # Burn things... ;)
Butane lighters burn hotter but use up fuel fast compared to regular lighter fluid lighters which do not burn as hot but do not use up fuel as fast.**The answer is found in chemistry. Butane is a specific chemical, ie. C4H10; an alkane with four carbons and ten hydrogens. Lighter fluid is not so specific in its contents - it is generally defined as a highly combustible (thus high octane) hydrocarbon; Naptha.
Refilling butane lighters can be dangerous if not done properly. It is important to use the correct type of butane fuel, do not overfill the lighter, and make sure there are no open flames nearby. It is also recommended to refill lighters in a well-ventilated area to avoid inhaling the butane gas.
Its a 9v battery sold by WIN FACTORY SERVICE for $2.75......... WIN FACTORY SERVICE Regina Heller Plaza 18324-2 Oxnard Street Tarzana, California 91356