Butane lighters burn hotter but use up fuel fast compared to regular lighter fluid lighters which do not burn as hot but do not use up fuel as fast.
**
The answer is found in chemistry. Butane is a specific chemical, ie. C4H10; an alkane with four carbons and ten hydrogens. Lighter fluid is not so specific in its contents - it is generally defined as a highly combustible (thus high octane) hydrocarbon; Naptha.
Butane will only stay a liquid under pressure. NORMAL lighters keep it in a sealed container so it only evaporates when the trigger is pressed. Zippo lighters are NOT sealed and even if they had a way to inject butane, it would all flow out the top. Zippos require a fuel that is a liquid at room temp and evaporates a little at a time so the sparks will ignite the gas. Zippo does produce a special butane lighter, however.
Refillable butane torches can be found at local drugstores such as CVS, RiteAid and Walmart, or at tobacco shops and sometimes gas station convenience stores. Refillable butane lighters can also be found online through eBay, Amazon and manufacturers such as Zippo.
You can try lighter fluid. Like the Zippo cigarette lighter fluid. This product is good for removing many things. Not sure if it will take off permanent marker but it is worth a try. use nail polish remover, i find it is the best thing.
BUTANE FILLING PREMIUM BUTANE IS REQUIRED TO INSURE OPTIMUM PERFORMANCE Of YOUR LIGHTER! LIGHTERS REQUIRE THE CLEANEST BUTANE AVAILABLE AT A PRESSURE OF 45 PSI. RECOMMENDED PREMIUM BUTANE BRANDS ARE PACKAGED IN (10-13 oz.) CANS WITH A METAL FILL TIP NOZZLE. NON-PREMIUM BUTANE (CLIPPER, RONSON, SUN) AND BRANDS WITH PLASTIC FILL TIP NOZZLES ARE NOT RECOMMENDED FOR IGNITION LIGHTERS AS THEY MAY CAUSE INCONSISTENT IGNITION AND PERFORMANCE. # You may be inclined to shake the butane can before using. NEVER do this, even though some websites actually say you should. Shaking adds too much propellant to the fuel and can result in accidents. # Fill with lighter in upside down position. # Put nozzle tip directly on valve opening and press down firmly for 4-5 seconds. # Butane spray back may occur with some lighters when tank is full.If the lighter is not equipped with a butane level window, use the following steps to ensure tank is full:a. Hold lighter in upside down position.b. Depress the filler valve with a small screwdriver. If liquid is expelled from the valve, stop immediately; the tank is filled to maximum capacity. # Warm the lighter in your hand for at least 30 seconds. Wait an additional 2 minutes before attempting to ignite the lighter. This allows enough time for excess butane to dissipate and the gas in the lighter to reach room temperature. # Burn things... ;)
no
Use can use any naptha lighter fluid in a Zippo. This may not be what you would identify as "normal," however; the more modern Bic lighter and many others use butane. Butane absolutely won't work in a Zippo. I'm not sure what would happen, but it could be anywhere from not working at all to a fiery explosion.
Butane
Butane will only stay a liquid under pressure. NORMAL lighters keep it in a sealed container so it only evaporates when the trigger is pressed. Zippo lighters are NOT sealed and even if they had a way to inject butane, it would all flow out the top. Zippos require a fuel that is a liquid at room temp and evaporates a little at a time so the sparks will ignite the gas. Zippo does produce a special butane lighter, however.
Naphta .
Yes, and many newsagents sell the official Zippo lighter fluid, as well as other brands (Swan etc). yes pretty much. You can also use Ronsonol lighter fluid.
Nothing really it all the same stuff they just want you to buy there own brand that's all...... i have a 1988 zippo i have had and i have used generic brands and it is still working fine
Butane, but I know there's a better one though. Butane is like the standard, while you could buy higher end fuels.
I wouldn't recommend it because the lighter fluid is just a liquid and the normal jet lighter fuel is a compressed gas. Having the gas compressed forces the gas out with the perfect amount of pressure. If you just put a liquid in it, it will just sit there and not do anything; maybe if you pressurize it and then make it into a fine mist when it comes out then it might work, but it wouldn't be too practical because it would be cheaper to buy butane than mod your lighter.
im not sure if you mean taking the fluid from a regular lighter and putting that into a zippo or just simply zippo to zippo but I'll answer both. I wouldn't recomend putting normal butane lighter fluid into a zippo because it runs out really fast and makes the flame far too big to be practical. if you want to change fuel from one zippo to another simply remove the insert, peel back the first felt layer, take out the cotton from inside and putting that cotton into the other zippo. hope that helped :)
Zippo style lighter fluid is essentially naptha.
Firelighters are made of various materials. Zip firelighters are made with compressed wood fibers and wax. Some homemade firelighters are made with sawdust, egg cartons, and wax.
Zippo lighter fluid. But any good naptha based fluid will work well.