0
Not in general. You can buy extension cords in a variety of lengths. However, the longer the cord the more the resistance and the bigger the voltage drop across the length of the cord. If you were using the cord outdoors and the junction was on the ground it is possible for moisture to cause a short at the junction.
What else can I help you with?
Is it acceptable by OSHA to plug an extension cord into another extension cord?
In Canada this is quite acceptable. One extension cord can be plugged into another extension cord. What has to be kept in mind though, is the load amperage at the end of the cords. Additionally plugging one cord into another increases the wire's total resistance. This effects the over all voltage drop of the cord, by lowering the voltage at the load. If the cord's wire size is increase in each additional cord added to the length, this would be one way to combat against the voltage drop. An example, if the first cord has a #14 size conductor the next size cord to plug into it should be a #12. If additional length is needed then the next size cord to extend the length should be a #10.This type of cord use is used on construction sites all the time. Keep in mind that extension cords are only to be used as a temporary source of power in temporary locations and they not to be used as a permanent installation power source.
What size extension cord should you use for your 120 volt 1725 watt iron?
#16 <<>> To load an extension cord to 1725 watts depending on the length of the cord, the bare minimum should be #14. A better size cord and my recommendation would be a #12 wire size extension cord.
What is the most number of outlets on a multi outlet extension cord?
The most number of outlets on a multi outlet extension cord are six. Any more then six outlets on an outlet extension cord and it would become dangerous.
Does a long extension cord draw more power than a short extension cord?
No. However, a longer extension cord has higher resistance for a given wire gauge or size compared to a short extension cord and the voltage at the load device may drop so low that it doesn't work properly. This may also be accompanied by a noticeable rise in the temperature of the extension cord. As a rule, use the shortest extension cord that will get the job done. If the extension cord must be long, use one that has heavy gauge wire to minimize voltage drop at the load.
Where could extension cord reels be purchased?
To find the proper extension cord reel the first thing that a person needs to do is check out the size of the cord and length. The reel has to be able to hold the extension cord. Some places to look for the reels would be Home Depot or Amazon.
Is it acceptable by OSHA to plug an extension cord into another extension cord-?
You can plug an extension cord into another extension cord. A extension cord is to help make doing something easier.
Is it safe to plug an extension cord into another extension cord?
No, it is not safe to plug one extension cord into another extension cord as it can create a fire hazard due to potential overloading of the electrical circuit.
Is it safe to plug one extension cord into another extension cord?
No, it is not safe to plug one extension cord into another extension cord as it can create a fire hazard due to overloading the electrical circuit.
Extension Cord?
form_title= Extension Cord form_header= Install extension cords in your office. What size extension cord do you need?*= _ [50] What color extension cord do you need?*= _ [50] Do you need a 3 prong extension cord?*= () Yes () No
Why does the current change at an extension plug when connected to a lamp?
Are you saying that you plug in a lamp and another lamp on that extension cord goes dimmer? If so then the extension cord wire is of a smll guage size and causing a voltage drop from the outlet to the cord output.
What are the safety considerations when using a wall-rated extension cord?
When using a wall-rated extension cord, it is important to consider safety precautions such as not overloading the cord with too many devices, avoiding running it under rugs or carpets, and ensuring it is not damaged or frayed. Additionally, always plug the extension cord directly into a wall outlet and never use it with a power strip or another extension cord.
How can I safely use an extension cord wire to power my electronic devices?
To safely use an extension cord to power electronic devices, make sure the cord is in good condition without any fraying or damage. Use a cord that is rated for the power needs of your devices and avoid overloading it. Plug the cord directly into a wall outlet, not into another extension cord. Unplug the cord when not in use to prevent overheating.
Which wire is hot on an extension cord?
The wire that is hot on an extension cord is typically the black wire.
Is it acceptable by OSHA to plug an extension cord into another extension cord?
In Canada this is quite acceptable. One extension cord can be plugged into another extension cord. What has to be kept in mind though, is the load amperage at the end of the cords. Additionally plugging one cord into another increases the wire's total resistance. This effects the over all voltage drop of the cord, by lowering the voltage at the load. If the cord's wire size is increase in each additional cord added to the length, this would be one way to combat against the voltage drop. An example, if the first cord has a #14 size conductor the next size cord to plug into it should be a #12. If additional length is needed then the next size cord to extend the length should be a #10.This type of cord use is used on construction sites all the time. Keep in mind that extension cords are only to be used as a temporary source of power in temporary locations and they not to be used as a permanent installation power source.
Why won't one XBOX 360 power cord work on another identical XBOX 360?
Because the power cord is specifically made for that model.
What are some safety precautions to consider when using a female extension cord end?
When using a female extension cord end, it is important to consider the following safety precautions: Ensure that the extension cord is in good condition without any frayed wires or damage. Do not overload the extension cord with too many devices plugged into it. Keep the extension cord away from water or wet areas to prevent electrical shock. Do not run the extension cord under carpets or rugs where it can overheat. Unplug the extension cord when not in use to prevent overheating and potential fire hazards.
What is the recommended length and type of extension cord to use for a dryer plug extension cord?
The recommended length for a dryer plug extension cord is 25 feet or less, and it should be a heavy-duty, 10-gauge wire extension cord to handle the high power requirements of a dryer.
