If you are viweing this because you want to change the newer 4-prong plug/outlet to fit an older 3 prong outlet/plug don't do it! The newer plug is safer and the 3 prong plug no longer meets code. See the discussions in other threads. all you need to do is hook the two hot leads on the outer terminals, then the nueatral, white wire on the center terminal and the green ground wire to the ground screw. Be sure to remove the bonding jumper that ties the neutral to the chassis. This is no longer needed as now you have a ground line from the outlet. There should be 3 insulated lugs in the dryer, two hots and a neutral. Connect the red and black wires in your new cord to the hot lugs (red & black are interchangeable), and the white neutral to the neutral lug. Neutral is the center wire on your older 3-wire cord, for reference. Connect the green ground wire directly to the chassis of the sryer using a convienent screw. Use the four prong cord if you can. It is safer because it has the extra ground wire which older cords did not.
Don't understand this question. If the breaker is on, then the dryer would function normally, if the breaker your are referring to is the one for the dryer. If the breaker is off then no function. A dryer runs on 220.
Chances are there is more than 1 outlet connected to the 110volt circuit you are looking to convert. So therefore the easy answer is No. The 240volt dryer circuit must be a dedicated single circuit for the dryer only.
Check the wattage of the blow dryer and add 500 watt. This will be the size of generator you will need to use.
Yes, it's called a step-up transformer because, if I understand correctly, you want to step up from a 110v power source to run a 220v dryer. Depending on the power (wattage) rating of the dryer, it will probably cost as much as having 220v service installed by an electrician. Furthermore, the 110v circuit must be fused for at least twice the current rating of the dryer, assuming the transformer is 100% efficient. This is because Power = Voltage x Current. If you halve the voltage (220 --> 110), you must double the current in order to maintain the same power rating. For example, if the dryer normally draws 20 amps at 220 volts, it will require at least 40 amps from a 110 volt circuit. This would require a 4000 volt-amp transformer-- a very pricey item indeed. If you opt for such a unit I would certainly consult a certified electrician.
To calculate the amperage needed to run a 1000-watt hair dryer, you can use the formula: Amperes = Watts / Volts. Assuming a standard voltage of 120V for household outlets in the US, the amperage needed to run a 1000-watt hair dryer would be approximately 8.33 amps. To convert this to milliamps, you would multiply by 1000, so approximately 8333 milliamps would be needed.
The only practical way to do that would be to sell the electric clothes dryer and use the proceeds toward purchase of a gas dryer. Even if it was possible to convert the dryer the cost would be prohibitive versus a new dryer. If you mean converting the building, then you would need to have natural gas plumbing installed, and you would need an outlet that matches the voltage of the new dryer.
No, the battery connected to an inverter would not have near enough power to run a dryer.
It will not last, and could possible catch fire but that's a long shot. A hose clamp would be better. One to fit the dryer vent is probably $2 or $3.
With Summer coming to an end, there will be some great Labor Day Sales coming up at the Major Retailers. Some stores to consider for a stacked washer dryer would be: http://www.homedepot.com http://www.sears.com http://www.lowes.com
Several factors could contribute to clothes taking 2 hours to dry in a dryer. These include overloading the dryer, using a lower heat setting, or a clogged lint filter or exhaust vent that inhibits proper airflow. It's also possible that the dryer is not functioning efficiently, in which case it may need maintenance or repair.
While anything is possible, this just isn't feasible.
Due to the weak economy and rising oil prices, many people are looking for any way possible to cut their utility bills. One way to cut your overall utility costs would be to find ways to save money with your gas dryer. If your dryer works using gas heat, you could save a lot of money by ensuring that the filter is always cleaned out. If your filter on your dryer is not cleaned out, then the heat will not pass through the dryer as easily, and you will need to run your dryer for a longer period of time to dry your clothes.
Major General Philip Schuler was in command of the Northern Division of the Continental Army in 1776. He spent time at his home in Albany NY planning a counteroffensive to the British "3Prong Attack" plan that would have divided the colonies.
No. A blow dryer sucks in air, heat/cools it, then blows it back out again. Without atmosphere, there is no air, and without air, there is no blow dryer.
Given that everyone would like to save as much space in their homes as possible, a stackable washer dryer just makes sense. Everyone needs to be able to save as much space as they can in order to store all of the things that they require. The stackable washer and dryer just helps a little in this area. They still function just as well as any other washer/dryer combination. It is just important to be aware that getting this type of washer and dryer is preferable rather than the traditional non stackable type.
The dryer plug is probably wired wrong, check where the cord is wired to the dryer first. Unplug the dryer befor starting to remove any screws or panels
The best hand dryer model that would be the best for mounting onto a marble wall would have to be the Exlerator Hand Dryer . It is more eco friendly and it has enough strength to be mounted on virtually any type of wall .