no,no,no if the shell would explode inside, (it does happen) the shrapnel would fly very long distances and at a very high rate of speed, please use hdpe pipe, it will contain an explosion or just have a blowout and not send peices everywhere.
no
A PVC pipe alone does not generate static electricity. Electrons need to be transfered for static electricity to be generated. Rubbing felt on the pipe or spraying it with sand are two common ways that people can use PVC pipe to generate static electricity.
It may be Poly Vinyl Chloride as in PVC pipe.
It's not used for making PVC resin, but it is used in processing it - they use it as a lubricant when making rigid PVC articles like pipe.
PVC or polyvinyl chloride is a polymer created from the alkene monomer vinyl chloride (CH2=CHCl)
PVC pipes do not corrode, hence these are used for drinking water supply.
Yes, PVC pipe is generally considered safe for drinking water as it does not leach harmful chemicals into the water. However, it is important to use PVC pipes that are specifically approved for potable water applications to ensure safety.
Orange PVC is called BlazeMaster and is strictly used for residential sprinklers in houses.
The best PVC pipe leak sealant to use for repairing a leak in a PVC pipe is a solvent-based PVC cement specifically designed for PVC pipes.
To repair a PVC pipe, you can use a PVC pipe cutter to remove the damaged section, clean the area, apply PVC primer and cement, then connect a new piece of PVC pipe using a PVC coupling or repair fitting.
The best method for cutting internal PVC pipes using an internal PVC pipe cutter is to first measure and mark the pipe at the desired cutting point. Then, insert the internal pipe cutter into the pipe and rotate it around the pipe to make a clean and precise cut. Be sure to follow the manufacturer's instructions for the specific pipe cutter you are using to ensure safe and effective cutting.
I was in the PVC pipe manufacturing business for over 30 years and have never heard of a "1K PVC" pipe. If "1K" means a 1,000 psi pipe, this does not exist as a commercial product. Sorry.
An instrument made of PVC pipe.
A pipe cutter is the best tool to cut PVC pipe.
Yes
The most effective method for removing a stuck PVC pipe using a PVC pipe extractor is to insert the extractor into the pipe, tighten it securely, and then twist and pull the extractor to gradually loosen and remove the pipe.
No, it is not safe or recommended to use PVC pipe for a dryer vent. PVC can be a fire hazard due to its low melting point, and it is not designed to handle the heat and moisture produced by a dryer. It is best to use metal ducting specifically designed for dryer vents to ensure safety and proper ventilation.