If we have six (6) feet of water, that will convert to about 2.6 psi (pounds per square inch).
The tool that compares the density of water to that of coolant is called a hydrometer. It measures the specific gravity of a liquid (the ratio of the density of the liquid to the density of water) to determine its concentration or strength.
psychrometer (measures water vapor content in the atmosphere)
No this is not my question
Graduated cylinder is a tool to measure volumes.
PSI stands for pounds per square inch, which measures the pressure of water coming out of a pressure washer. The higher the PSI, the more forceful the water stream, which can help remove dirt and grime more effectively. Higher PSI generally means better cleaning performance, but it's important to use the right PSI for the surface being cleaned to avoid damage.
50 psi of air is equivalent to 1145.037 psi of water.
If we have six (6) feet of water, that will convert to about 2.6 psi (pounds per square inch).
Inches of water x 0.03613 = psi
The tool that compares the density of water to that of coolant is called a hydrometer. It measures the specific gravity of a liquid (the ratio of the density of the liquid to the density of water) to determine its concentration or strength.
There are about 34.6 psi in 15 feet of water.
It measures water evaporation.It measures water evaporation.It measures water evaporation.It measures water evaporation.It measures water evaporation.It measures water evaporation.
300 feet of sea water exerts a pressure of approximately 130 psi.
No, 200 psi of air is not the same as 200 psi of water. This is because water is denser than air, so the pressure exerted by water at 200 psi would be greater than that of air at the same pressure.
a scanning tool that measures the depth or height of tool marks.
Validity is the extent to which a measurement tool actually measures what we wish to measure.
To convert psi (pounds per square inch) to feet of water, you can use the conversion factor: 1 psi is equivalent to approximately 2.31 feet of water. This means that if you have a pressure of 1 psi, it would support a column of water approximately 2.31 feet high.