answersLogoWhite

0

The term "two wire" typically refers to a type of electrical wiring configuration that uses two conductors to complete a circuit. This setup is commonly found in various applications, such as in lighting systems or sensors, where one wire serves as the power supply (positive) and the other as the return path (negative or ground). In some contexts, such as in two-wire current loop systems, the two wires carry a continuous signal for communication or control purposes. Understanding the specific application is crucial for proper installation and functionality.

User Avatar

AnswerBot

3d ago

What else can I help you with?

Continue Learning about Natural Sciences

Is a wire marked comm a ground wire?

Probably not. We'd need to know what the wire goes to in order to be certain about this.


What size wire do you need for a 30 watt mixer?

For a 30 watt mixer, you would typically need a wire size of at least 18 AWG (American Wire Gauge) for power cords and connections. This wire size can safely handle the current draw of a 30 watt device without overheating. It's always recommended to check the manufacturer's specifications for the mixer to ensure you are using the correct wire size.


How do you wire an older 2 wire 30 amp compressor to a 3 wire 30 amp dryer plug?

I am guessing that the dryer is 220-240 VAC as is the compressor. I also assume that the third wire on the dryer is a ground. You need to make sure that the metal chassis on the compressor is not connected to the two wires. You then need to create a covered junction box where you have the two existing wires and a ground wire that you connect to the compressor metal chassis with a screw type connector. Ground wire should be 10 AWG. Now you have three wires. Connect the two hot wires of supply to two original wires on compressor and ground wire to the chassis ground.


A wire is run between the tips of two poles one pole is 23 feet taller then the other pole the poles are 37 feet apart how long does the wire need to be to reach between the two poles?

The wire needs to be 48 feet long to reach between the two poles. This is calculated by using the Pythagorean theorem to find the hypotenuse of the right triangle formed by the two poles and the wire between them.


When does a motor not need a neutral wire?

If the motor is operated from a three phase three wire distribution system the motor will not need a neutral wire.

Related Questions

Wire color for an oxygen sensor in a 99 Ford F250?

Which oxygen sensor? There are two of them. They each have 4 wires and each wire has two colors. There were two models of the f250 also, need to know engine size. Sorry.


Is a wire marked comm a ground wire?

Probably not. We'd need to know what the wire goes to in order to be certain about this.


Need to know where the cooling fan sensor is located on the 1990 dodge dynasty?

It is the two wire sensor screwed in next to the thermostat housing.


How do you hook a tachometer on 2001 mustang 4.6?

need to know where to hook coil wire is all i need to know.


What is the plug wire placement on 4.3Lt?

need to know the year.


What is the gauge of wire for a 13.8 dc power cords?

You need to know the current to determine the wire gauge.


How much does pure nickel wire weigh per foot?

Someone would need to know what gauge the wire is to answer that.


How do you hot wire a 1991 dodge spirit?

If you have to ask, you do not need to know how to do it.


Wire Wisconsin regulator and rectifier model no tjd regulator no yj60?

You need to know if you have a two or three wire rectifier.YJ-60 is a 30 amp regulator.Red lead goes to red on stator,and black goes to black.


How to Wire Money?

If you are looking to wire money, you may find it to be sort of mystifying at first if you don't know exactly where to go or what to do. In the event that you do need to wire money, there are a few things to keep in mind before you ever step foot out the door. First, you need to know how much you want to send, and whether the company performing the wire will wire that much. For example, there are a few international names in the wire transfer business that will not wire more than five thousand dollars at once. If you need to wire more than this, you will need to wire the maximum they will allow at one location, then go to another location to wire the rest.


What is the signal wire for MAF for a 94 Mazda protege?

need to know what wire go were for a 94 Mazda protege MAF sensor


Where is the wire harness on a 2007 Pontiac Torrent?

Any typical vehicle has multiple wire harnesses. Need to know the symptoms your having.