answersLogoWhite

0

Take a 500ml beaker, add 160ml of glycerol. make up the volume to 200ml by adding water. Stir them with a magnetic stirrer for a while and here is your 80% Glycerol.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

What is 10 percent of 200ml?

20ml


What is the volume of alchol in 200ml of a solution if it is 20 percent?

200ml of solution x 20% of alcohol = 40ml of alcohol..


How do you prepare 200ml of ethyl acetate of 0.1 Normality solution?

To prepare 200ml of 0.1 N ethyl acetate solution, you will need to calculate the amount of ethyl acetate needed. Since the molecular weight of ethyl acetate is around 88.11 g/mol, for 200ml of 0.1 N solution, you would need around 1.76g of ethyl acetate. Dissolve this amount of ethyl acetate in distilled water to make up the final volume to 200ml.


What is 200ml in dl?

200mL equates to 2dL (deciliters).


How many 300mg aspirin tablets to make 200ml of shingles paint containing 3.6 percent aspirin in chloroform?

24


What is the mass of an empty 200ml beaker?

Change 200mL into decimal.


Is 200mL less than 124 inch?

yes 200ml is less that an 124 inch


How will prepare 200ml of 10 percent NaOH Solution?

Dissolve 0.4 g of NaOH in 100 ml of water. Try it out. Actually it is not suitable to prepare NaOH solutions in standard flasks.It should be made in beakers & must be standardised..This is done to find the correct normality...


What is 200 ml minus 4 l?

200ml - 4L = -3L 800ml or 200ml - 4000ml = -3800ml


A fruit juice can contains 200ml how many cans are needs to prepare 2 liter of fruit juice?

10 cans are needed to pepare 2 litres of fruit juice :) Hope helped.


You are provided with a 1000ppm sodium solution describe how you would prepare a volume of 200ml with a concentration of 5ppm sodium in a two step dilution?

To prepare a 200ml solution with a sodium concentration of 5ppm from a 1000ppm stock solution, you will first dilute the stock solution by a factor of 200. So, take 0.2ml of the 1000ppm solution and dilute it to 40ml with water. This will give you a solution with a concentration of 50ppm. Then, take 0.4ml of this 50ppm solution and dilute it to a final volume of 200ml with water to achieve the desired 5ppm sodium concentration.


How many cl in 200ml?

20cl