0
What else can I help you with?
Which repair material is used when the subsurface debris is suitable for fill but limited?
In this case, a controlled low-strength material (CLSM) is typically used. CLSM can be poured into confined spaces and will harden into a stable material that can support loads. It is often employed in situations where subsurface debris is present but filling with traditional materials is impractical.
Can T8 LED tube light be used with ballast and can ballast be removed and will it work?
A T8 LED tube has to be used with a ballast to bring the correct voltage to the tube for it to operate correctly. Removing the ballast from the circuit will prevent the tube from operating.
Where can a HID ballast be bought?
A HID ballast can be purchased from Amazon or eBay. The term 'ballast' is used to describe large inductors used to limit AC current for fluorescent lighting.
Can choke replaced by a resistor in fluorescent lamp circuit?
fluorescent lamp work on the principle of ionizing the gas , which requires very high potential difference . this excess voltage is provided by the choke coil . when the starter breaks the circuit , current suddenly drops , thus to maintain the current the choke coil a very high voltage is supplied by the choke coil . this very high voltage cannot be obtained from a resistor or a rheostat , since it being a linear element , thus it cannot be a replacement for choke.
Can you run a 50 watt halide bulb on a 100 watt halide ballast?
No, it is not recommended to run a 50 watt halide bulb on a 100 watt halide ballast. The ballast should match the wattage of the bulb to ensure proper operation and to avoid potential damage to the bulb and ballast. It is best to use a ballast that is rated for the wattage of the bulb being used.
Which repair material is used when the subsurface debris is suitable for fill but limited?
In this case, a controlled low-strength material (CLSM) is typically used. CLSM can be poured into confined spaces and will harden into a stable material that can support loads. It is often employed in situations where subsurface debris is present but filling with traditional materials is impractical.
Can T8 LED tube light be used with ballast and can ballast be removed and will it work?
A T8 LED tube has to be used with a ballast to bring the correct voltage to the tube for it to operate correctly. Removing the ballast from the circuit will prevent the tube from operating.
Where can a HID ballast be bought?
A HID ballast can be purchased from Amazon or eBay. The term 'ballast' is used to describe large inductors used to limit AC current for fluorescent lighting.
Is The choke panel is used to close the hydraulic choke on the choke skids?
Yes
Is the choke panel used to close the hydraulic choke on the choke skids?
Yes
How is the choke panel used to close the hydraulic choke on the choke skids?
Yes
What is a trim ballast tank?
That is a ballast tank used to alter the angle of the submarine up or down
Can you use 250W metal halide bulb in a 1000W metal halide ballast?
No. The lamp has to match the ballast. The lamp will not ignite if the wrong ballast is used.
Why small rocks are keeping in railway track?
That is called ballast. Ballast is used to support the railroad ties.
How do you replace a 3 speed ballast with a 2 speed ballast in a fan?
Ballasts are not used with motor control.
What is ballast and trapped fuel?
On occasion, ballast is required to bring the centre of gravity within operational limits. There are two methods of carrying ballast: - Ballast (hold loaded) -Ballast fuel: the fuel used for this purpose is called ballast fuel. Trapped Fuel:The fuel in an engine or fuel system that is not in the fuel tanks
What is main ballast of a vessel?
Ballast used to be stones. With the invention of the electric pump, I think most ships will actually pump water into and out of tanks to adjust their ballast now.
