0
What else can I help you with?
What is the difference between conductive and non-conductive?
Conductive materials allow electricity to flow through them easily, while non-conductive materials do not allow electricity to flow through. Conductive materials typically contain free electrons that can move and carry an electric charge, while non-conductive materials have tightly bound electrons that do not move easily. Examples of conductive materials include metals, while examples of non-conductive materials include rubber or plastic.
What are semi-conductive metalloids?
Metalloids are known as semi-conductors meaning they can conduct electricity, but they are not good conductors. Metals are good conductors. Non-metals are bad conductors.
What is meant by minimum electrical clearance?
The minimum electrical clearance is the minimum distance between electrical conductors with different potentials (voltage). This generaly determined by the maximum possible voltage differenge between the conductors. Dimensions larger then the minimum electrical clearance are OK, however smaller dimensions start to risk arc-over between your conductors.
What are all of the conductors between the service equipment and the final branch circuit?
The conductors between the service equipment and the final branch circuit include service conductors, feeder conductors, and branch circuit conductors. Service conductors connect the utility service to the service equipment. Feeder conductors distribute power from the service equipment to the panelboard or distribution board. Branch circuit conductors then carry power from the panelboard to individual outlets, fixtures, and appliances.
What is hydrate sub cooling?
Hydrate subcooling refers to the temperature difference between the equilibrium temperature at which hydrate formation occurs and the actual temperature of the fluid or gas mixture. It is an important factor in the management of hydrate formation in pipelines and production systems, as subcooling can prevent the unwanted formation of hydrates by keeping the mixture below the hydrate formation temperature. Proper subcooling can enhance system efficiency and reduce operational risks associated with hydrate blockages.
What is the difference between resistance and insulation?
Resistor is a current a insulator is a not conductive and conductors can conduct.
What is the difference between conductive and non-conductive?
Conductive materials allow electricity to flow through them easily, while non-conductive materials do not allow electricity to flow through. Conductive materials typically contain free electrons that can move and carry an electric charge, while non-conductive materials have tightly bound electrons that do not move easily. Examples of conductive materials include metals, while examples of non-conductive materials include rubber or plastic.
Is boron conductive?
Boron is a semiconductor, meaning it has an intermediate level of conductivity between insulators and conductors. In its pure form, boron is not a good conductor of electricity, but its conductivity can be enhanced by doping or combining it with other elements.
Difference between stray and parasitic capacitance?
Parasitic capacitance is unavoidable and usually unwanted capacity between two or more conductors which exists due to close proximity and which typically causes non-ideal circuit behavior. Stray capacitance, as it is typically thought of, is a type of parasitic capacitance. It is the capacity from a conductor to its surroundings which is the aggregate of the conductors in its environment inversely weighted by the distance to each of the environmental conductors.
Are scissors conductors?
They are Conductors, not much for insulation though. Differences between conductors and insulators? Conductors let energy such as electricity .
Material that will partially conduct electricity?
Semi-conductive materials, such as silicon, are types of materials that can partially conduct electricity. These materials have electrical conductivity between that of conductors and insulators, making them useful in electronic devices like transistors and diodes.
Why the spacing between the conductors of same phase is greater as compared to spacing between different phase conductors in double circuit lines?
I think you mean spacing between line conductors, rather than phase conductors. If there is a greater spacing between line conductors in one circuit, compared with anothercircuit, then the two circuits are operating at different voltages.
What are semi-conductive metalloids?
Metalloids are known as semi-conductors meaning they can conduct electricity, but they are not good conductors. Metals are good conductors. Non-metals are bad conductors.
What is meant by minimum electrical clearance?
The minimum electrical clearance is the minimum distance between electrical conductors with different potentials (voltage). This generaly determined by the maximum possible voltage differenge between the conductors. Dimensions larger then the minimum electrical clearance are OK, however smaller dimensions start to risk arc-over between your conductors.
How much must be the distance between two conductors of 11kv line?
600mm is the distance between two conductors in 11kv line
Does capacitance exists between two current carrying conductors?
Capacitance exists between any two conductors, current carrying or not.
What is relation between voltage and conductors?
Your question is unclear. But, if you are asking what the relationship between voltage and the distance between conductors is, then the higher the voltage, the greater the distance must be.
