0
Typically only on dedicated circuits for certain appliances like an electric dryer or hot water heater, electric oven or stove, resistance heating or perhaps central air conditioning. If there are 240 volt receptacles they are different than 120 volt receptacles so that you can't make a mistake and plug a 120 volt appliance into a 240 volt circuit.
Answer 2Some countries use 115 Volts AC for household supplies, some use 220, 230 or 240 Volts AC.
See the link below for a list of which countries use which voltage.
What else can I help you with?
Can you change wall plugs 110 volt systems to suit 240 volt appliances?
No, you cannot simply change the wall plug to make a 110 volt outlet support a 240 volt appliance. The voltage requirements of the appliance and the outlet must match for safe operation. You would need to install a dedicated 240 volt outlet and ensure that the wiring and circuitry can handle the higher voltage. It is recommended to consult a licensed electrician for this type of electrical work.
What happens when 110 volt airbrush compresor TC 196 is plugged into a 240 volt source?
First, someone would have changed the plug before that would be possible. 240 Volt receptacles do not accept 120 Volt plugs. Second, IF someone changed the plug on the compressor, then plugged it in using both legs of the 240 Volt circuit, the compressor motor would self destruct instantly; internal wiring would burn and you would smell the burning insulation.
Can you use a 240 volt pool pump on normal house power?
Most typical US residences have both 240 and 120 AC voltage. The pump would have to tie into a 240 volt breaker in your electric panel. To ensure safety have an electrician familiar with pool installations install the wiring and motor/pump and also make sure that the breaker is sized for the motor amperage rating. In many pool installations a separate electric panel will be installed outside near the pump and any pool electric devices.
Can you use 240 volts with a 120 volt supply?
No, it is not possible to use 240 volts with a 120 volt supply directly. You would need a transformer to step up the voltage from 120 volts to 240 volts. Attempting to use 240 volts with a 120 volt supply without a transformer can damage equipment and pose a safety hazard.
How do I know if I have a 30 amp breaker at my house to plug a trailer into?
If it is a 30 amp breaker then it is a 240 volt outlet.
Can you change wall plugs 110 volt systems to suit 240 volt appliances?
No, you cannot simply change the wall plug to make a 110 volt outlet support a 240 volt appliance. The voltage requirements of the appliance and the outlet must match for safe operation. You would need to install a dedicated 240 volt outlet and ensure that the wiring and circuitry can handle the higher voltage. It is recommended to consult a licensed electrician for this type of electrical work.
Normal voltage house in the US?
The vast majority of homes are supplied with 120/240 volt or 110/208 volt.
How do you wire a L14-30 female to 2 r-15 male plugs?
You can't do that. An L14-30 is a 240/120 outlet and you cannot "make" 240 volts from two separate plugs; you have to have a hard-wired 240-volt source (either another type of outlet or wired directly to 240 volts).
How do you switch from 120 volt to 240 volt in house?
Answer for USA, Canada and countries running a 60 Hz supply service.To operate a 240 volt load in the home you use two adjacent breakers. This will give you a voltage of 240 volts where as one breaker to neutral will give you 120 volts.
What happens when 110 volt airbrush compresor TC 196 is plugged into a 240 volt source?
First, someone would have changed the plug before that would be possible. 240 Volt receptacles do not accept 120 Volt plugs. Second, IF someone changed the plug on the compressor, then plugged it in using both legs of the 240 Volt circuit, the compressor motor would self destruct instantly; internal wiring would burn and you would smell the burning insulation.
What is more efficient to run a pool pump on 120 Volt or 240 Volt?
240
Can you use a 120 volt lamp where a 240 volt lamp was used?
No, the bulb would last about 5 seconds... if that.
How can I convert a 240 volt power source to a 120 volt power source using a 240 volt to 120 volt adapter?
To convert a 240 volt power source to a 120 volt power source using a 240 volt to 120 volt adapter, simply plug the adapter into the 240 volt outlet and then plug your 120 volt device into the adapter. The adapter will step down the voltage from 240 volts to 120 volts, allowing you to safely power your device. Make sure the adapter is rated for the appropriate wattage to avoid damaging your device.
Can you convert 110 volt to 240 volt?
Yes
Can you use a 240 volt pool pump on normal house power?
Most typical US residences have both 240 and 120 AC voltage. The pump would have to tie into a 240 volt breaker in your electric panel. To ensure safety have an electrician familiar with pool installations install the wiring and motor/pump and also make sure that the breaker is sized for the motor amperage rating. In many pool installations a separate electric panel will be installed outside near the pump and any pool electric devices.
Can you use 240 volts with a 120 volt supply?
No, it is not possible to use 240 volts with a 120 volt supply directly. You would need a transformer to step up the voltage from 120 volts to 240 volts. Attempting to use 240 volts with a 120 volt supply without a transformer can damage equipment and pose a safety hazard.
How do I know if I have a 30 amp breaker at my house to plug a trailer into?
If it is a 30 amp breaker then it is a 240 volt outlet.
