answersLogoWhite

0

It is somewhat more energy intensive to recover oil from oil sands than it is from conventional oil wells. The "oil" in oil sands is closer to tar and will not flow unless heated or diluted with lighter hydrocarbons. Recovery is usually by either strip mining (where the oil sand is closer to the surface) or by injecting steam, solvents, and/or hot air into the sand (where the sands are deeper). Once the tar/oil is recovered, it must be further pre-processed to turn it into a form that can be handled by conventional oil refineries. This usually requires 3 steps:

  1. removal of water, sand, physical waste, and lighter products,
  2. catalytic purification to remove sulfur, metals, and nitrogen,
  3. hydrogenation - usually through hydro-cracking.

These pre-processing steps take large amounts of energy and water, while emitting more carbon dioxide than conventional oil. Most of the oil sands that are currently used as sources of oil use processes that require quite a bit of water for the recovery process. For this reason 'sine' oil sand deposits are even more difficult to process. For example the large oil sand deposits in eastern Utah, which is quite arid, are not being mined.

There are also political considerations:

President Clinton, by executive order, placed most of the oil sand deposits in eastern Utah off limits for development (some have speculated that it was in retaliation for finishing 3rd in Utah in the Presidential election of 1992 behind Bush and Perot - Bush 43.36, Perot 27.34%, Clinton 24.65%). At the very least, order was driven by eco-politics rather than any issues with technology or economics.

One of the largest oil sand deposits in the world is located in Venezuela which nationalized its oil industry in 1975-1976 placing it under the country's state-run oil and natural gas company but allowed for some private development. In 2001, Venezuelan president Hugo Chávez imposed a new Hydrocarbons Law that raised royalties paid by private companies from 1-17% to 20-30%. In 2007, Chávez announced the nationalization of the oil industry and required that all private companies hand over majority ownership to the government of Venezuela. Any company that refused to sign over the majority ownership simply had all their assets seized and turned over to the state-run oil company. This put a damper on oil sand development since the companies with expertise to develop it were no longer willing to risk losing their investment to another seizure by the Chávez government.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Natural Sciences

Where are the oil fields in the interior plains?

Some major oil fields in the interior plains of North America are located in Alberta, Canada, particularly in areas such as the Athabasca Oil Sands. In the United States, oil fields are found in states like North Dakota and Montana. These regions are known for their significant reserves of oil and natural gas.


What is Tar sand use for?

Tar sands, also known as oil sands, are a type of unconventional oil deposit that is extracted and processed to produce heavy oil. This oil is used primarily to produce gasoline, diesel fuel, and other petroleum products. Tar sands have become increasingly important as a source of oil due to declining conventional oil reserves.


How long does it take for oil sands to form?

Oil sands take millions of years to form through the gradual accumulation of organic material, mostly from microscopic plants and animals. The process involves the burial and compaction of these materials over time, along with the chemical transformations that occur under pressure and heat to eventually form oil sands.


Why does heating sands make it easier to separate the oil from them?

Heating sands causes the oil to become less viscous, making it easier to separate from the sand particles. The heat reduces the oil's surface tension and increases its flowability, facilitating its removal from the sand during the separation process.


What region does most of Canada's oil and natural gas come from?

Most of Canada's oil and natural gas production comes from the western provinces, particularly Alberta and Saskatchewan. These regions are home to vast reserves of oil sands, conventional oil, and natural gas deposits that make Canada one of the world's major energy producers.

Related Questions

What are disadvantages of Alberta oil sands?

expensive pollution


What are Canadian oil sands made of?

The oil sands in Canada are found in the province of Alberta. This is a major energy source for Canada right now, with plans to export the oil via the US or the West Coast.


What is the oil sands oil?

the oil sands is found in Alberta and is a natural recourse! People often visits the oil sands to make an adventure and to learn more about the oil sands!!!


What major resource in Canada adds to air pollution?

The oil sands are a major resource which also contribute to air pollution.


When was Western Oil Sands created?

Western Oil Sands was created in 1975.


What is Canadian Oil Sands's population?

The population of Canadian Oil Sands is 2,008.


When was Canadian Oil Sands created?

Canadian Oil Sands was created in 1978.


Is oil sands bad?

Oil sands are bad because when they make the oil sands into gasoline it causes a lot of pollution. It's good because The gasoline we make out of it makes Canada a lot of money since the oil sands are in Alberta, Canada.


What are the Athabasca Tar Sands?

The Athabasca Tar Sands, also known as the Athabasca oil sands, are deposits of bitumen in Alberta, Canada. They are a major source of unconventional oil production but are controversial due to environmental concerns surrounding their extraction process, which is energy-intensive and produces high levels of greenhouse gas emissions.


What are the advantages and disadvantages of extracting petroleum products from oil sands?

Advantages of extracting petroleum products from oil sands include vast reserves potentially meeting global energy demands, economic benefits in terms of job creation and revenue generation. Disadvantages include high production costs, environmental impacts such as deforestation and greenhouse gas emissions, and the extensive water usage associated with extraction processes.


What are some energy sources is nonrenewable?

coal, natural gas, oil, oil shale and tar sands, nuclear power


What are bituminous sands?

Bituminous sands are oil sands , tar sands and more tecnically they're an unconventional petroleum deposit . I hope I hlped you!!