0
What else can I help you with?
When observing the prepared bacterial smears at the 1000X magnification should your iris diaphragm be all the way open or stopped down for minimal light?
The iris diaphragm should be partially closed to allow for optimal contrast when observing bacterial smears at 1000X magnification. This setting helps improve visibility of the specimen by reducing glare and enhancing details in the sample.
What is involved in making smear?
Making a smear involves preparing a thin layer of a sample, typically biological material like blood or bacterial culture, on a microscope slide. The sample is usually spread evenly using a sterile tool, such as a glass rod or another slide, to create a uniform layer. Once the smear is prepared, it is often fixed with heat or chemicals to preserve the cells before staining, which enhances visibility under a microscope for analysis.
Give the reason for passing bacterial smear through the flame before staining?
Passing the bacterial smear through the flame before staining is done to heat-fix the bacteria onto the slide, making them adhere firmly and preventing them from washing off during the staining process. Heat fixing also kills the bacteria, which helps in the preservation of their cellular structures for visualization under the microscope.
Why use a loop full of water and not a large drop of water on a bacterial smear slide?
Using a loop full of water instead of a large drop of water on a bacterial smear slide allows for better dispersion and even distribution of the bacterial sample. A loop full provides a more controlled and manageable volume, preventing excess water that could dilute the sample or lead to uneven spreading. This ensures clearer observation of individual bacterial cells under the microscope, facilitating accurate identification and analysis.
What are the precautions during preparation of bacterial smear and heat -fixing process?
During the preparation of a bacterial smear, it is crucial to use sterile techniques to avoid contamination. Use a sterile inoculating loop to transfer a small amount of culture onto a clean slide, and ensure the smear is thin and evenly spread. When heat-fixing, gently pass the slide through a flame to adhere the bacteria to the slide without burning them, as excessive heat can distort cellular structures. Always wear gloves and goggles to protect yourself from potential biohazards.
How would you define a properly prepared bacterial smear?
the bacteria are evenly spread out on the prepared slide in such a concentration that they are adequately separated from one another bacteria are not washed off the slide during staining bacterial form is not distorted
What would be the result of overheating the bacterial smear?
Overheating the bacterial smear can result in distortion or destruction of the bacterial cells, making it difficult to observe them under the microscope. This can lead to inaccurate or inconclusive results when trying to identify the bacteria present on the smear.
What are the characteristics of good bacterial smear?
no thing
When observing the prepared bacterial smears at the 1000X magnification should your iris diaphragm be all the way open or stopped down for minimal light?
The iris diaphragm should be partially closed to allow for optimal contrast when observing bacterial smears at 1000X magnification. This setting helps improve visibility of the specimen by reducing glare and enhancing details in the sample.
Is a bacterial infection test the same as a chlamydia test?
Testing for chlamydia is very specific. A regular bacterial culture or wet smear will not detect chlamydia.
Why does the physician take a Pap smear?
Such swab tests are used to check for gonorrhea and chlamydia, or bacterial vaginitis, which is a bacterial infection resulting in inflammation of the vagina.
What is involved in making smear?
Making a smear involves preparing a thin layer of a sample, typically biological material like blood or bacterial culture, on a microscope slide. The sample is usually spread evenly using a sterile tool, such as a glass rod or another slide, to create a uniform layer. Once the smear is prepared, it is often fixed with heat or chemicals to preserve the cells before staining, which enhances visibility under a microscope for analysis.
Give the reason for passing bacterial smear through the flame before staining?
Passing the bacterial smear through the flame before staining is done to heat-fix the bacteria onto the slide, making them adhere firmly and preventing them from washing off during the staining process. Heat fixing also kills the bacteria, which helps in the preservation of their cellular structures for visualization under the microscope.
What is the Result of over heating the bacterial smear?
When you heat the bacteria more than three times on the flame of Bunsen burner, the bacteria will damage and if you stain this damaged bacteria, the shape of bacteria is not typical and sometimes you just see the residue of stain on the slide.
What is cocobacilli in a pap smear?
Coccobacilli on a pap smear result is informational. If the woman is comlplaining fo vaginal discharge and odor, treatment for bacterial vaginosis is offered. If she has no complaints, treatment is not needed.
Why use a loop full of water and not a large drop of water on a bacterial smear slide?
Using a loop full of water instead of a large drop of water on a bacterial smear slide allows for better dispersion and even distribution of the bacterial sample. A loop full provides a more controlled and manageable volume, preventing excess water that could dilute the sample or lead to uneven spreading. This ensures clearer observation of individual bacterial cells under the microscope, facilitating accurate identification and analysis.
At what total magnification should you begin to look at a sample?
Depending on what microscopy you are doing.. Bacterial microscopy starts with 40x and Blood smear microscopy at 10x.
