0
For a closed circuit to occur, you need a power source to provide energy, a complete loop or pathway for the current to flow through (including conductive materials and wires), and a load or device that uses the electrical energy flowing in the circuit. This allows the circuit to be continuous and functional.
What else can I help you with?
What three things are needed for photosynthesis to occur in an algae cell?
Three things needed for photosynthesis to occur in an algae cell are sunlight, carbon dioxide, and water. These essential ingredients are used by algae to convert light energy into chemical energy in the form of glucose, with oxygen being released as a byproduct.
What will cause a decrease in pressure in a closed container?
A decrease will occur if the lid of the container is opened.
What is needed for photosynthesis to occur and why?
There are two raw materials water and CO2. Sun light is needed too.
Enzymes are important to living things because they permit?
Enzymes are important to living things because they permit biochemical reactions to occur at a faster rate by lowering the activation energy needed for the reaction to proceed. This allows cells to carry out essential functions such as metabolism, growth, and repair more efficiently.
Where do chemical reactions occur in electrochemical cells?
Chemical reactions occur at the electrodes of electrochemical cells. At the anode, oxidation occurs as electrons are released into the circuit, and at the cathode, reduction occurs as electrons are accepted from the circuit. This flow of electrons creates an electric current in the cell.
What happens when the circuit is complete and the switches are closed?
*Look at the simple circuit illustrated in Figure A-2. What will happen when only switch S1 is closed? Correct Answer= "Nothing will happen-the light bulb won't light up." <<>> If there is a load in the circuit the load will operate. If there is no load in the circuit and it is complete then a short circuit will occur and something in the circuit will burn open. If the circuit is complete and there is a fuse or breaker in the circuit, then the fuse or breaker will open the circuit.
What is the meaning of the idiom Behind closed doors?
It means things which occur in secret.
Why does short circuit break whole circuit?
Because a whole circuit needs a short circuit to work. It's like a remote; the remote is the whole circuit and the batteries needed are the short circuit. if those batteries are broken, the remote won't work. In other words, without a short circuit, a whole circuit can not occur successfully. Hope this helped, Charlie the Grey
What is needed for cholangitis?
The two things that are needed for cholangitis to occur are: 1) obstruction to bile flow, and 2) presence of bacteria within the bile ducts
What three things are needed for photosynthesis to occur in an algae cell?
Three things needed for photosynthesis to occur in an algae cell are sunlight, carbon dioxide, and water. These essential ingredients are used by algae to convert light energy into chemical energy in the form of glucose, with oxygen being released as a byproduct.
Why is it necessary for oscillation to occur in a circuit?
It is not "necessary" for oscillation to occur in any "arbitrary" circuit. It depends on the design objectives. Please be more specific, and restate the question.
What energy conversions occur when the switch is closed?
When the switch is closed in an electric circuit, electrical energy from the source is converted into other forms of energy. For example, the electrical energy is converted into light and heat in a light bulb, or into mechanical energy in a motor.
In a series circuit with two loads what would occur if one load was to be removed while the circuit is energized?
The circuit will de-energize.
In which conditions flash-over occur while putting a LT circuit breaker in a switchgear?
Flash-over can occur: - If you are trying to rack in a closed Circuit Breaker (in case the interlock is unavailable); - If the rack in operation is slow enough to develop an arc between Circuit Breaker contacts and live Bus bar (it is impossible to extinguish the arc). Can't think of other cases but these were the ones that I've heard of and actually happened during maintenance of 11 / 6.6 kV CBs.
When a dead short occur what happens to circuit resistance?
The circuit resistance is likely to gradually drop and in such case it will cause the circuit to burn down.
What must happen in order for the photoelectric effect to occur?
A metal of a certain ionization potential.A light source that provides light of that exact energy potential.a circuit that has all the other components needed.
What 3 things is needed for photosenthesis to occur?
Photosynthesis requires Carbon Dioxide + Water in the presence of light, it's products are Glucose and Oxygen.
