In metalworking, a gas or air jet is typically used to blow molten metal away. This is often achieved through a process called "blowing," where a high-pressure stream of air or gas is directed at the molten metal to remove impurities or to aid in forming shapes. Additionally, in certain applications like metal casting, a mechanical blast may be used to control the flow and placement of molten metal.
No, the mantle is not made of molten metal. It is a layer of solid rock that lies beneath the Earth's crust and above the core. The mantle is primarily composed of silicate minerals.
Mercury
Wind.Cold wind ;)
Casting
The solidification of molten metal is an exothermic process. During this phase change, the metal releases heat as it transitions from a liquid to a solid state. This release of heat occurs because the molecules in the liquid metal lose energy and arrange themselves into a more stable solid structure.
The electric current spalls metal into the machining liquid, and the metal cools to form metal "dust" that is carried away by the liquid.
No, solid metal typically sinks in molten metal due to its higher density. When a solid metal is placed on top of molten metal, it will usually sink until it reaches a point where its density is equal to that of the molten metal around it.
You can use a process called Carbon Gouging which is a carbon electrode in a special stinger that blows compressed air to blow out the molten metal
metal maybe iron or nickel or both
Molten ore refers to metal in a liquid state, typically resulting from heating raw ore material to high temperatures. This molten form allows for easier extraction and processing of the metal from the ore.
no METAL is a type of an elements eg. silver, copper MOLTEN means soemthing has melted completely. eg. molten lava from a volcano.
molten
The molds should be sand coated insides and a hole upside mold then introduce the molten metal.
Dross is a term used to describe impurities or scum that float on the surface of molten metal.
The blacksmith poured the molten metal into the mold to create a new sword.
A metal is actually solid beforwe application of high heat,a metal becomes molten when the heat is high enough to enable breakage of bonds between molecules of the metal such that the molecules are free to move as in liqiud.so a molten metal becomes solid when molecules form bond again as in solid.
Lava, or molten lava.