0
What else can I help you with?
How long does current remain in a 220 volt circuit?
The current in a 220 volt circuit depends on the resistance of the load connected to it. Ohm's Law (I = V/R) states that current (I) is equal to voltage (V) divided by resistance (R). So, the current will vary based on the resistance of the circuit.
Why does a plug circuit overload cause damage?
When a plug circuit overloads, it causes excessive heat buildup in the wiring and electrical components, which can lead to melting, burning, or even a spark that can cause a fire. Additionally, the overload can damage electronic devices and appliances connected to the circuit by delivering too much electrical current than they are designed to handle.
What causes a electric current in a electric circuit?
Voltage causes current to flow in an electric circuit.
How a fuse controls the flow of electric current in a circuit?
A fuse does not control the flow in a circuit, it limits the current in a circuit. If the load in a circuit shorts out the fuse link melts and opens the circuit and stops the current flow and prevents the wires feeding the circuit from melting and catching fire. resist
What is a circuit called if its operating and the current is flowing?
A closed circuit is one where the current is flowing continuously from the source to the load and back to the source, completing a loop. An open circuit, on the other hand, is one where the current cannot flow because the circuit is broken at some point.
How many 97 W light bulbs can you use in 100V circuit?
Nominally one for each Ampere of current that the mains supply is capable of delivering on a continuous basis.
What is the voltage obtained when a capacitor is placed in a dc circuit?
Eventually, the capacitor will charge to approximately the source voltage level. As this occurs, the current in the circuit will drop to near zero.
Why reducing current in circuit?
The current in a circuit is reduced to prevent the circuit from over load.
What is the current draw for a ford fuel pump?
approximately 5.7 to 6.0 amps depending on temperature , load, and circuit resistance.
What is the effective current in an ac series circuit with a peak current of 20A?
Assuming a sine wave, the RMS current (the effective current) is the peak current divided by the square root of 2. In this case, that would be approximately 14 ampere.
What is the formula for total current in a series circuit?
Current = (Voltage across the circuit) divided by (Total resistance of the circuit). The current is the same at every point in the series circuit.
How short circuit current measure?
In shortg circuit current is infinitive.
What is he definition of electrical current?
The current flowing in an electrical circuit.
What happens if the track of the current is broken in a series circuit?
If the track of the current is broken in a series circuit, the circuit will be interrupted and no current will flow. The components in the circuit will not receive any power and will not function until the circuit is repaired.
What is the current in a circuit that has a resistance of 30 ohms and a power of 2 watts?
To find the current in the circuit, you can use the formula: Power = Current^2 * Resistance. Given the values, you can rearrange the formula to solve for current: Current = sqrt(Power / Resistance). Plugging in the values, you get Current = sqrt(2 / 30) which simplifies to approximately 0.27 amperes.
Current in a circuit is inversely proportional to?
In a circuit , current is inversely proportional to the resistance.
What flows in a circuit to generate a current?
Electricity flows in a circuit to generate a current.
