answersLogoWhite

0

clockwise

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What safety device is fitted to ensure a circuit breaker can not be racked out when closed?

A remote racking device is the name of a safety device that is fitted to ensure a circuit breaker cannot be racked out when closed.


How siphon breaker works in the big closed tanks?

A siphon breaker works in big closed tanks by transferring fluid to an upper level coming into a tank from above. The purpose of the siphon breaker is to produce pressure at its outlet and the fluid weight to produce pressure.


How is a Load applied to a ac generator?

The load conductor is connected to the load side of the generator breaker. Once the generator is up to speed the load breaker is closed and the voltage is then applied to the load.


How does a garage door motor know which direction to operate in if the door is only closed halfway?

The circuitry "remembers" the previous direction and reverses that direction.


Is there a starter fuse on a 2002 883 harley Davidson hugger?

No... it has a 30Amp circuit breaker located in the fuse box. It is an automatic reset type 'breaker that will reset to closed once it cools down.


How much for a ticket to Waterford?

That is depending on what you mean. If you mean for travelling there, it depends on how far you are from it and how you are travelling. If you are talking about the visitor centre to the Waterford Crystal factory, it is currently closed due to problems with the company. Check their website below.


When will one direction store will be closed?

it closes on the 28th of December 2012


Why did they close one direction world?

Because of the stupid,dumb and mega bad singing band One Direction. It is all their fault they closed it.


What is the anti pumping relay in SF6 circuit breaker?

Pumping means if breaker is close & give close command (electrical or manual) to it,spring will discharge & charge again. To prevent this pumping anti pumping feature is required,which in turn will help to restrict unnecessary operations of breaker mechanisms.


What is operation of an antihunting relay in circuit breaker?

This is also called anti pumping relay. for understanding you have to understand the working of breaker. positive extends to "Low Pressure Lockout" & "Low Pressure Alarm". after maintain the pressure in breaker these NO becomes NC and when breaker closes the auxiliary of breaker get closed and simultaneously extend the positive to the antipumping relay coil by auxiliary contact. by this coil get energised and holding contact get connected and the one of the contact of antipumping coil (NC) become NO which disconnect the command supply of main breaker. by this till when the antipumping relay get energised no further command (+ve) extends to breaker closing coil. This is Antipumping/ Antihunting Relay.


What is Niall scared of from one direction?

He is afraid of closed spaces, and doesn't really like birds.


What happens when the circuit is complete and the switches are closed?

*Look at the simple circuit illustrated in Figure A-2. What will happen when only switch S1 is closed? Correct Answer= "Nothing will happen-the light bulb won't light up." <<>> If there is a load in the circuit the load will operate. If there is no load in the circuit and it is complete then a short circuit will occur and something in the circuit will burn open. If the circuit is complete and there is a fuse or breaker in the circuit, then the fuse or breaker will open the circuit.