One way to separate them would be to subject the mixture to a temperature high enough to melt the sugar (around 366.8°F or 186°C) in a dry and oxygen-free atmosphere. The sugar will still tend to caramelize however. You could burn off the sugar from a mixture leaving the salt behind, but this wouldn't really constitute separation since you would not be recovering the sugar.
You could also achieve some separation via electrolysis since sugar is fairly non-polar.
Since the molecules are quite different in size, you might also separate them via osmosis through a membrane with pores too small to pass sugar molecules.
Despite some misinformation, you cannot do it by dissolving in alcohol. Sucrose is NOT soluble in alcohol (at least not to any significant degree). If you add some water to the alcohol you start to get some solubility, but then you also increase the solubility of salt in the solution as well.
You could probably salt from sugar by dissolving the mixture in condensed anhydrous ammonia. The solubility of sucrose in condensed ammonia is about 72% sucrose in ammonia while sodium chloride is essentially insoluble in ammonia. You need some pretty cold conditions to do this though since ammonia is liquid in the range from -77 to -33 °C.
Put them in water. Sugar dissolves, sand remains Filter the solution to separate sand and salt. Evaporate solution with dissolved salt to get salt back
1. Salt will dissolve in carbon disulphide 2. Now we have a mixture of iron filings sugar and carbon disulphide(salt dissolved in it) 3. Separate iron filings by magnet. 4. Remove the sugar by Decantation process. 5. Separate carbon disulphide and salt by distilation.
Pour the mixture in alcohol. The sugar will dissolve and the salt can be separated, and then, pour water on the alcohol/sugar solution. Wait for the water/alcohol to evaporate, then the sugar will be left.
add water and then boil it.
It will be difficult to separate them in something that they both dissolve into (like water or ethanol). You can try changing the temperature and the sugar may precipitate out, depending on the sugar. To get a complete separation I would evaporated the water first and just separate the salt and sugar. Then you can separate the solids by dissolving the sugar into a polar solvent like toluene. NaCl will not dissolve in toluene but all of the sugar should.
Put them in water. Sugar dissolves, sand remains Filter the solution to separate sand and salt. Evaporate solution with dissolved salt to get salt back
Sugar burns when it is heated to a very high temperature. Salt does not burn.
yep
1. Salt will dissolve in carbon disulphide 2. Now we have a mixture of iron filings sugar and carbon disulphide(salt dissolved in it) 3. Separate iron filings by magnet. 4. Remove the sugar by Decantation process. 5. Separate carbon disulphide and salt by distilation.
Any of the three types of chromatography (column , thin - layer or paper) can be used to separate the salt from sugar and vice-verse !
Evaporate the water, suger and salt will be left behind.
Sugar is soluble in ethanol; sodium chloride is not dissolved.
Sugar is soluble in ethanol; sodium chloride is not dissolved.
A mixture of salt and sugar can be separated by using an organic solvent to dissolve the sugar. When the sugar is dissolved, it can be separated by filtering the salt from the liquid sugar,then recrystallise both solutions to from back their original crystals.
Evaporate the water, suger and salt will be left behind.
Pour the mixture in alcohol. The sugar will dissolve and the salt can be separated, and then, pour water on the alcohol/sugar solution. Wait for the water/alcohol to evaporate, then the sugar will be left.
well, i think you lick it. The salt tastes salty, and the sugar tastes sweet. Isn't that simple?