0
NM on Romex wire stands for "Non-Metallic." This type of electrical cable is commonly used for residential wiring and is designed for indoor use. The non-metallic sheathing provides insulation and protection for the individual conductors inside, making it easier to install and less prone to corrosion. NM cable is typically used in dry locations and is suitable for general-purpose circuits.
What else can I help you with?
What wire is commonly used in house wiring?
Romex, All you have to do is go to a hardware store and tell them you need house wire. It comes in a box. I am not sure how many feet. If you are just looking for the gauge, they will know that too.
What is the trade name for this cable romex?
Romex is the trade name for non-metallic sheathed cable manufactured by Southwire Company, LLC.
What year did romex wire come out?
The exact year that Romex Wire came out is not listed on their website. However, they do say that they have been selling the wire for over 88 years. I have found the year 1926
What was used before romex wire became available?
Before Romex wire became available, cloth-covered wire, knob-and-tube wiring, and armored cable (BX) were commonly used for electrical wiring in residential buildings.
Is that possible to run romex wire to the under ground basement?
No, it is not possible to run Romex wire directly underground in a basement. Romex wire is not rated for direct burial underground and should not be used in this application. Instead, you should use UF-B (underground feeder) cable or conduit with appropriate wiring for underground installations.
What does the letters NM stand for on outside of Romex wire?
Non-metallic.NM does not refer to the wire itself; the wire is copper. Nor does it refer to the jackets around the wires; those jackets are made of color-coded PVC (polyvinyl chloride)--black, white, and red.Instead, NM pertains to the sheathing--a 30 mil-thick PVC jacket--that binds the individual wires together.NM is used to refer to any type of electrical wiring sheathed in a plastic coating, not just Romex brand.
What does NM stand for on the outside of romex wire?
Non-metallic.NM does not refer to the wire itself; the wire is copper. Nor does it refer to the jackets around the wires; those jackets are made of color-coded PVC (polyvinyl chloride)--black, white, and red.Instead, NM pertains to the sheathing--a 30 mil-thick PVC jacket--that binds the individual wires together.NM is used to refer to any type of electrical wiring sheathed in a plastic coating, not just Romex brand.
What wire is commonly used in house wiring?
Romex, All you have to do is go to a hardware store and tell them you need house wire. It comes in a box. I am not sure how many feet. If you are just looking for the gauge, they will know that too.
What is the trade name for this cable romex?
Romex is the trade name for non-metallic sheathed cable manufactured by Southwire Company, LLC.
What does the letters NM stand for on the outside of wire?
Non-metallic.NM does not refer to the wire itself; the wire is copper. Nor does it refer to the jackets around the wires; those jackets are made of color-coded PVC (polyvinyl chloride)--black, white, and red.Instead, NM pertains to the sheathing--a 30 mil-thick PVC jacket--that binds the individual wires together.NM is used to refer to any type of electrical wiring sheathed in a plastic coating, not just Romex brand.
Do you need 3-wire romex to feed bedroom ceiling box by electrical code?
No, you can feed it with a 2 wire Romex + ground. It depends on what is mounted on the ceiling. If it is just a light all you need is 2 wire + ground Romex. However if it is a fan/light and you want to control each one independant of the other you will need to use 3 wire Romex + ground. This is of course if you have 2 seperate switches. You would then connect the red wire to the blue light wire and the black wire to the black fan wire. If you use 2 wire Romex just connect the blue and black fan/light wire to the black wire in the ceiling box.
What are the standard Romex wire colors used in electrical wiring?
The standard Romex wire colors used in electrical wiring are black, white, and bare copper.
What year did romex wire come out?
The exact year that Romex Wire came out is not listed on their website. However, they do say that they have been selling the wire for over 88 years. I have found the year 1926
What is a general name used for a common household electric cable?
Modern NM/ Romex
Can you mix aluminum wire with romex in a junction box?
No, do not mix aluminum wire with copper wire.
Can you run Romex through a wire mold?
The key is that you don't want to cause over-heating in wire. The answer is you can probably do what you want unless it involves high current and a small cross section in wire mold such that the Romex could generate too much heat. You could always strip out the wires inside the Romex and just run them in the wire mold.
Is romex wire copper or aluminum?
Standard Romex is a three-strand, solid core wire, individually insulated, in a common sheath to make it easier to pull. For a short time, some manufacturers were making romex with aluminum because the cost of copper was so high, but the aluminum wire was not as good as the copper, and the practice was discontinued.
