A light bulb is a source of electric light.
In an incandescent light bulb, the glass bulb forms a protective shield around a glowing filament.
The air inside the glass bulb is removed, or replaced with an inert gas.
Electric current is passed through a thin metal filament (usually tungsten), which causes it to glow white hot, giving out light.
The protective bulb stops the filament from burning up, as it has no Oxygen.
No, the glowing of a light bulb is a reversible change because it can be turned off by disconnecting the power source. The light bulb will stop glowing once the electrical current is interrupted.
No, an apple does not contain enough energy to power a light bulb. A light bulb requires electricity to produce light, which usually comes from a power source such as batteries, generators, or electrical outlets. The energy stored in an apple is not enough to produce the amount of electricity needed to power a light bulb.
The electrical foot contact in a light bulb serves as a connection point for the electrical current to flow into the bulb. It ensures that the electrical circuit is completed when the bulb is screwed into a socket, allowing the filament or LED components to illuminate. This contact is essential for the bulb's operation, enabling it to produce light when powered.
In a closed circuit, electrical current flows from the power source through the wires, through the bulb, and back to the power source. When the current reaches the filament inside the bulb, it heats up and emits light, causing the bulb to light up.
mechanical to electrical to light energy
No.it uses energy sources (electrical energy to light up
No, a bulb is not a source of energy. A bulb simply converts electrical energy into light energy. The electrical energy is usually provided by a power source, such as a battery or a power outlet.
No.it uses energy sources (electrical energy to light up
To light a light bulb you need to connect to a source of electricity like a battery or an electrical outlet.
No, there needs to be an electrical source
No.it uses energy sources (electrical energy to light up
It goes back to that source
No, a light bulb needs a closed circuit with a power source, such as a battery or electrical outlet, in order to light up. Simply connecting a wire to a light bulb without a power source will not allow it to light up.
A light bulb uses electricity as its source of energy.A light bulb to uses electrical energy which is supplied to a resistor that gives off heat as well as light. The resistor is a thin coiled piece of wire made of Tungsten because it has the highest melting point of any metal.For more information see the answer to the Related question shown below.
No. The term SOURCE means that it is a supply of electrical energy, and a light bulb does not supply electricity, it uses it. A battery, generator, fuel cell, or solar cell would be a source.
To light a bulb, you typically need a power source (such as a battery or electrical outlet), a conductive material to connect the bulb to the power source (such as wires), and a functioning bulb itself. When these components are properly connected and the power is supplied, the bulb should light up.
The job of a light bulb is to convert electrical energy into visible light energy. (Not ALL of the electrical energy a bulb uses is converted to light energy. Their efficiency is quite low. An incandescent light bulb is more efficient as a heater than as a source of visible light. Fortunately, our eyes are very sensitive.)