0
What else can I help you with?
What is the size of 3 core copper cable for 3 phase 125 amps current for 10 meter length indoor cable tray?
Allowable ampacities for not more that 3 copper conductors in a cable based on an ambient temperature of 30 degrees C. A #1 copper conductor with an insulation factor of 75 or 90 degrees C is rated at 130 and 140 amps respectively.
Which size cable use for 37 kw induction motor?
For a 37 kW induction motor, a cable size of approximately 10 AWG (American Wire Gauge) would be suitable for typical installations. However, the specific cable size required would depend on factors such as the length of the cable run, ambient temperature, and voltage drop considerations. It is recommended to consult with a qualified electrician to determine the appropriate cable size for your specific application.
What is amp rating 2.5sq mm cu cable?
The amp rating of a 2.5sq mm copper cable depends on factors such as insulation type, installation method, ambient temperature, and specific application. In general, a 2.5sq mm copper cable can typically carry around 20-25 amps of current in a typical household wiring scenario. It is recommended to consult with a qualified electrician or refer to local electrical codes for precise amp ratings.
How many amps can mm sq electrical cable can carry?
The ampacity of an electrical cable depends on several factors, including the cable's cross-sectional area (in mm²), insulation type, installation conditions, and ambient temperature. As a general rule of thumb, copper cables can carry approximately 10 amps per mm² for low-voltage applications. For example, a 1.5 mm² copper cable typically carries around 10-16 amps, while a 2.5 mm² cable can carry approximately 16-25 amps. Always consult local electrical codes and standards for specific applications.
What is sheath temperature?
Sheath temperature refers to the temperature of the outer layer or "sheath" surrounding a wire or cable, particularly in electrical and thermodynamic contexts. This temperature is crucial for assessing the thermal performance and safety of the cable, as excessive sheath temperatures can indicate overheating and potential failure. Monitoring sheath temperature helps ensure that the cable operates within safe limits to prevent insulation degradation and electrical hazards.
Can type tw cable be used in an area that has an ambient temperature of 65c?
No
What is the difference between thermosetting and thermoplastic cable?
The terms are used to categorise cable insulation according to its properties, such as its operating temperature, rather than the ingredients from which it is are made.These terms are now used by the IEE Wiring Regulations to describe insulation formerly described, for example, as 'pvc' (a 'thermoplastic' material) or rubber ( a 'thermosetting' material).
Can Type TW cable be used in an area that has an ambient temperature of 658C?
There is no wire insulation on this earth that can stand a temperature of 658 degrees C (1268 degrees F.).
Formula for working out cable size?
There is actually no specific formula used to work out cable size. In order to determine the type of cable you need and the size you need, you need to know the source of the supply, the voltage of the system, the ambient temperature, and the method you plan on laying out the cable.
What is difference between ACT armored cable and ac armored cable?
Southwire, a manufacturer of this type of cable defines ACT as a multiple conductor thermoplastic insulated cable with steel spiralled interlocking armour. The armour has the appearance of flexible conduit. AC cable is also known as BX cable. Common insulation materials thermoset and thermoplastic as used in AC cable. Type AC cable have different identifiers and insulation type. Type ACTHH has 194 degree (90 degree Celsius) thermoplastic insulation. Type ACTH has 167 degree (75 degree Celsius) thermoplastic insulation. Type AC has thermoset insulation. Type ACHH has 194 degree (90 degree Celsius) thermoset insulation.
What is the difference between Type AC Cable and Type ACT cable?
ACT has thermoplastic insulated wires. AC is old MC is the modern cable.
What is meant by PVC cables?
PVC is Polyvinyl Chloride, a thermoplastic. PVC cable is a conductor or cable using PVC as an insulator.
How do you reset ambient sensor on a Oldsmobile bravada?
To reset the ambient sensor on an Oldsmobile Bravada, first, ensure the vehicle is turned off. Disconnect the negative battery cable for about 10-15 minutes to reset the vehicle's computer system. Reconnect the battery cable, and then start the vehicle to see if the ambient temperature sensor is functioning properly. If the issue persists, the sensor itself may need to be inspected or replaced.
What is a snake cable?
A snake cable, also known as a multicore cable, is a single cable that houses multiple individual cables within it. It is commonly used in audio applications to carry multiple audio signals between different pieces of equipment, reducing cable clutter and simplifying setup.
What is the largest following ampacities that is allowed in a raceway containing thirty-six No10 RHW-2 copper wires in an area where the ambient temperature is 30 C or 86 F?
If a cable insulation is described as RHW, you would be able to use the cable for what maximum temperature? A. 194°FB. 140°FC. 86°FD. 167°F
How do you figure your celsius rating for wire sizing?
The ambient insulation rating of wires and cables is imprinted on the wire and cables. The labels on the cables will tell you the wire size, number of conductors and temperature rating of the wires and cables. The higher the cable and wire temperature ratings the higher the amount of current that is allowed to be drawn by the wire and cable according to the electrical code book.
What are the causes of derating of cables?
1. We consider cable de-rating factor, because the method of laying of cable either in air, duct or trench, affect the current carrying capacity as dissipation of heat in air is more than in duct or trench. Now the factors that causes derating are 1. ambient temperature (this is the average temperature of the plant). If surrounding temperature is higher than cable temperature at which it is designed then that increase the resistance of cable conductor which decreases the current 2. Number of cables in cable tray either they are touching each other or at a distance. If cables are touching each other, they created dielectric field around them which in case of touching causes interference with one another that causes resistance to increase. 3. No. of cable trays in a tier.
