This expression is from the sport of horse racing-- the winning horse has to get his or her nose across the wire to be judged the winner. In business, this expression means working right up to the very last minute, just as time is running out; it carries the meaning of being under pressure, having a deadline that must be reached before the opportunity is lost.
The grooved wire is the neutral wire, which carries the current back to the power source. The smooth wire is the hot wire, which carries the current from the power source to the device, in this case, the lamp. It's important to connect them correctly to ensure the lamp functions properly and safely.
A wire gauge is a number that indicates how thick the wire is. A larger gauge number means a thinner wire. Gauge and diameter can be linked by looking up wire tables.
To wire an up-down switch, you would typically connect the power source to one terminal of the switch and the load (such as a motor) to the other terminal. When the switch is in the up position, it sends power to the load to move it in one direction. When the switch is in the down position, it reverses the polarity of the power to the load to move it in the opposite direction. Make sure to follow the wiring diagram provided with the switch to ensure proper installation.
In standard electrical wiring, the black wire is typically the "hot" wire carrying the current, while the white wire is the neutral wire returning the current. If the wire has clear insulation, it may be difficult to distinguish between the two visually. It is best to use a voltage tester to determine which wire is hot.
A loose kill switch wire on your out board motor will cause the engine to lose power. As the kill switch loses contact the motor will begin to bog down or completely quit.
Down the Wire was created in 2009.
Looking down at everyone, and not being a part of things, only a spectator
pure adrenaline..... Doesn't mean anything to me
The idiom down to the wire means to the very last possible moment. Therefore, the entire phrase would stand to mean that "it went to the very last split second and we almost missed your flight, but made it."
Whistling Down the Wire was created on 1976-06-25.
The phrase "coming down to the wire" means that a situation is reaching a critical or decisive point at the very last moment. It implies that time is running out and a decision or action needs to be made quickly.
You can wire and amp down to 0.3 ohms by decreasing its windings.
The grooved wire is the neutral wire, which carries the current back to the power source. The smooth wire is the hot wire, which carries the current from the power source to the device, in this case, the lamp. It's important to connect them correctly to ensure the lamp functions properly and safely.
it mean wire
If you mean a bare copper wire, that is the "ground" wire.
what does wire service mean
Down to the Wire - 2009 was released on: USA: 2009 (Silk City Flick Fest)