Oxygen and acetylene are used.
You light the acetylene first, then you add oxygen.
The element used in an oxy-acetylene flame is carbon. Acetylene gas acts as the fuel, while oxygen is used as the oxidizer in the flame. The high temperature resulting from the combustion of acetylene and oxygen produces a clean and precise flame that is commonly used in cutting and welding applications.
Calcium acetylene and calcium carbide are not the same. Calcium carbide is a chemical compound composed of calcium and carbon, while calcium acetylene is a gas produced when calcium carbide reacts with water. Calcium carbide is commonly used in the production of calcium acetylene for welding and cutting applications.
Acetone is used in acetylene tanks to absorb and stabilize acetylene gas. It acts as a solvent that helps dissolve acetylene, allowing for safer storage at higher pressures. By absorbing acetylene, acetone prevents the gas from becoming too concentrated, which could lead to instability or detonation. This combination helps ensure the safe handling and transport of acetylene.
Aluminum is the most abundant element used to make containers and deodorants.
You light the acetylene first, then you add oxygen.
The element used in an oxy-acetylene flame is carbon. Acetylene gas acts as the fuel, while oxygen is used as the oxidizer in the flame. The high temperature resulting from the combustion of acetylene and oxygen produces a clean and precise flame that is commonly used in cutting and welding applications.
Acetylene is commonly used in welding with oxygen to create a high-temperature flame for cutting and welding metal.
Hades used the flames of the underworld.
Copper is commonly used to produce turquoise-colored flames in fireworks. The addition of chlorine compounds can also help achieve this color.
You answered your own question. Oxygen and Acetylene. Other mixes are now used in place of Acetylene so the process is now called Oxy-Fuel.
Mixing Acetylene and Oxygen in the correct proportions produces an extremely hot flame. Using just enough Oxygen so that the Acetylene is almost completely consumed in the flame is called a Neutral Flame. In most welding and cutting applications you would utilize this flame. Reducing the amount of Oxygen produces a Carburizing Flame. It is yellowish and not as hot as a Neutral Flame, but, is used in certain situations. Welding Aluminum is one. Increasing the Oxygen produces an Oxidizing Flame. It produces a flame that is pointed, colder, and louder than a Neutral Flame. It wastes fuel and isn't as efficient as a Neutral Flame.
The most common gases used for thermal cutting are oxygen, acetylene, and propane. Oxygen is typically used as an oxidizer to support the cutting process, while acetylene and propane are used as fuel sources for the heat generation.
Calcium acetylene and calcium carbide are not the same. Calcium carbide is a chemical compound composed of calcium and carbon, while calcium acetylene is a gas produced when calcium carbide reacts with water. Calcium carbide is commonly used in the production of calcium acetylene for welding and cutting applications.
The element that is used to make pink glass is selenium. This element is also used to make glass that is red in coloring.
GASSES - Oxygen and Acetylene. Acetylene is sometimes replaced by a mixture of gasses. The Oxygen increases the burning rate/temperature of Acetylene and temperatures in excess of 6,000o F can be reached.
The chemical acetylene is used as a fuel some times, and a chemical building block. It is used in Oxyacetylene welding. It has other uses such as hardening steel, and it was once used to light up towns via street lights.