From the information given, what you've made is called a "solenoid." Basically a coil of wire wrapped around a core, usually of iron, or some other sort of magnetic material. The more coils, the stronger the electromagnet will become, and thus the stronger the magnetic force. The mathematical formula for finding the strength of the induced magnetic field (B) is,
B = uonI
In other words, the strength of the magnetic field (and thereby magnetic force) is directly proportional to the current and number of loops.
The magnet on the surface and the metal 300 ft down - no. Lowering the magnet to the metal, then lifting - yes.
magnetic pull
If possible cover the magnet with a sheet of paper and gently sprinkle the iron filings over the sheet ot paper, they will stick in a pattern following the magnetic "lines of flux" which will get closer and closer near the poles of the magnet. Afterwards you can cleanup by lifting the sheet of paper off of the magnet and the filings will fall away. Without the paper the filings will usually become tightly stuck to the magnet, making it hard to clean.
You can control the strength of an electromagnet by adjusting the current flowing through it, which is not possible with a permanent magnet. Additionally, you can turn the electromagnet on and off by controlling the electric current, allowing for greater flexibility in applications such as lifting objects or generating magnetic fields.
No, that statement is false. The strength of a magnet affects the magnetic field it generates but not necessarily the change in motion it causes. The change in motion is determined by factors such as mass, distance, and the magnetic field's influence on an object.
A lifting magnet is an electromagnet that is meant to hold or move material that comes in contact with the magnet. This is the opposite of a traction magnet.
the magnetic field of a magnet is measured through Gaussmeters.
A electro magnet is used for lifting things by the magnetic force provided by the amount of coils and the size of the battery
Depends on the shape of the magnet, but in general, the field is spheroid around the pole of the magnet.
The magnet on the surface and the metal 300 ft down - no. Lowering the magnet to the metal, then lifting - yes.
In general, no.
Statement: All birds lay eggs. Converse: All animals that lay eggs are birds. Statement is true but the converse statement is not true. Statement: If line A is perpendicular to line B and also to line C, then line B is parallel to line C. Converse: If line A is perpendicular to line B and line B is parallel to line C, then line A is also perpendicular to line C. Statement is true and also converse of statement is true. Statement: If a solid bar A attracts a non-magnet B, then A must be a magnet. Converse: If a magnet A attracts a solid bar B, then B must be non-magnet. Statement is true but converse is not true (oppposite poles of magnets attract).
Lifting power versus lifting distance is a primary concern. Also consider the wipe off factor. Then magnet size.
The lifting capacity of a magnet depends on its strength and the material it is attracting. Generally, a 2-pound magnet can lift objects weighing up to 2 pounds, but this may vary depending on the surface area and magnetic strength of the magnet.
You can magnetize a piece of steel or iron, by stroking it with one end of a magnet. Stroke in one direction only, lifting off and away between each stroke. This aligns the atoms in a regular direction, in the blank piece of steel.
A magnet always has two poles.They have a magnetic field.Electromagnets can be made much stronger than permanent magnets.A magnet always has two poles.
The space around a magnet where the force of the magnet can act is the space occupied by the magnetic field. Alternatively we say that the magnetic field acts in the space around a magnet. That is a very qualitative statement with little predictive value. More predictive value is contained in a statement that the strength of the magnetic field at any position in the vicinity of a magnet is measured by the torque which is exerted on a small magnet moment (compass) place in the vicinity of a magnet. This, recorded with the direction the test compass points is actually a mapping of the magnetic field of a magnet. As a side note, if carefully measured one discovers that strength of the field around a magnet decreases as the inverse cube of the distance when far from the magnet. The field is mostly in the volume near the magnet but the weakening field continues to exist at all distances from the magnet.