These are the names given to the bottom of the thoracic vertebrae. Attached to these two bertebrae are the floating ribs.
It depends on the wattage of each T12 fluorescent tube. However, a typical T12 fluorescent tube is around 40 watts. So, if you have a total of 200 watts available, you could power five T12 fluorescent tubes.
T12 and F12 tubes have different diameters - T12 tubes are 1.5 inches in diameter while F12 tubes are 1 inch in diameter. They are not interchangeable because they have different fixtures and ballasts. T12 tubes are being phased out due to energy efficiency regulations.
some may cause diseases
Yes, you can use a 32 watt T12 fluorescent lamp in a fixture that previously housed a 40 watt T12 fluorescent lamp. However, the light output will be slightly lower. It's advisable to check the fixture's compatibility with the lower wattage lamp to ensure proper performance.
These are the names given to the bottom of the thoracic vertebrae. Attached to these two bertebrae are the floating ribs.
It depends on the wattage of each T12 fluorescent tube. However, a typical T12 fluorescent tube is around 40 watts. So, if you have a total of 200 watts available, you could power five T12 fluorescent tubes.
it could overheat and become damaged if it is driving a high torque. Much better to use a gearbox.
The only difference between Y12 and T12 is the Kilos per meter. In a Y12 there is 0.888 Kilos and a T12 bar has 0.612 Kilos.
The inferior surface of the T11 vertebra articulates with the superior surface of the T12 vertebra below it, forming a facet joint that allows for movement and stability of the thoracic spine. This articulation plays a role in supporting the torso and facilitating movement in the mid-back region.
Its damaged.
The conus medullaris is the bottom part of the spinal cord. It normally ends at T12 or L1, so you are normal. Below that level, the spinal canal contains a bundle of loose nerves called the cauda equina.
T12 and F12 tubes have different diameters - T12 tubes are 1.5 inches in diameter while F12 tubes are 1 inch in diameter. They are not interchangeable because they have different fixtures and ballasts. T12 tubes are being phased out due to energy efficiency regulations.
T8 bulbs are thinner and more energy-efficient than T12 bulbs. T8 bulbs have a diameter of 1 inch, while T12 bulbs have a diameter of 1.5 inches. T8 bulbs also produce more light and have a longer lifespan compared to T12 bulbs.
The main difference between a T8 and T12 bulb is their size and energy efficiency. T8 bulbs are smaller in diameter and more energy efficient than T12 bulbs. T8 bulbs also produce more light output for the same amount of energy compared to T12 bulbs.
i
it gets bad