the speaker will be pushed past its farthest flex point and it will eventually start tearing the actual speaker and will break
A total of 5 watts isfive times morethan 1 watt.
The choice between a 24-watt and a 6-watt iPod docking speaker depends on your preferences and needs. A 24-watt speaker will generally provide louder and more powerful sound, while a 6-watt speaker may be sufficient for smaller rooms or personal listening. Consider the size of the room, volume levels you prefer, and your listening habits before making a decision.
100 watt
For a 2000-watt speaker system, the receiver should ideally have a power rating that matches or exceeds the speaker's capacity to ensure optimal performance and avoid distortion. A general rule of thumb is to aim for a receiver with a power rating of at least 50-75% of the speaker's wattage. Therefore, a receiver with around 1000 to 1500 watts would be suitable, depending on usage and listening preferences. However, it's also important to consider the impedance and efficiency of the speakers and receiver.
A 3 watt LED has a power consumption of 3 watts. This means that it consumes 3 watts of electrical energy when operating.
It depends on the environment, a 2 watt speaker is usually smaller and more portable but a 12.5 watt speaker is louder and usually has better sound quality.
sure you can, your amp will only deliver 52 watts to the speaker, more importend would be the impedance of the speaker . it should be equal to what your amp has! may be 8 ohms
No.
you can buy speakers from Polk Audio that are rated at 100 watts a piece.
There are 1000 milli-watts in one watt.
A total of 5 watts isfive times morethan 1 watt.
The choice between a 24-watt and a 6-watt iPod docking speaker depends on your preferences and needs. A 24-watt speaker will generally provide louder and more powerful sound, while a 6-watt speaker may be sufficient for smaller rooms or personal listening. Consider the size of the room, volume levels you prefer, and your listening habits before making a decision.
1 mega watt is 1,000,000 watts
Yes. That would be the ideal wattage. When if comes to watts you don't want to wire speakers to a system that will push more wattage than they can handle. Think of watts as an amount of power. If you push more power through to the speakers than they can handle than you'll blow them. Example: [Stereo]-----60watts------>[Speaker with 45 watt capacity] = Not good. You can wire a speaker with a higher wattage capacity than what the stero will put out. Example: [Stereo]-----60watts------>[Speaker with 60 watt capacity] = Good. Example: [Stereo]-----60watts------>[Speaker with 75 watt capacity] = Good too.
1 kilo Watt = 10^3 (1000) Watts 1 mega Watt = 10^6 (1,000,000) Watts 1000 kilo Watt = 1000*1000 Watts = 1,000,000 Watts = 1 Mega Watt Therefore...1000 kW = 1 MW Hope that helps! ^_^
Two watts? 1.0000000000000000000000001 watts?
There are 1/.1 = 10, .1 watts in 1 watt.