0
For a 2000-watt speaker system, the receiver should ideally have a power rating that matches or exceeds the speaker's capacity to ensure optimal performance and avoid distortion. A general rule of thumb is to aim for a receiver with a power rating of at least 50-75% of the speaker's wattage. Therefore, a receiver with around 1000 to 1500 watts would be suitable, depending on usage and listening preferences. However, it's also important to consider the impedance and efficiency of the speakers and receiver.
What else can I help you with?
Will your speakers blow if your receiver is 160 watts per channel but your speakers are only 130 watts each?
It is unlikely that your speakers will blow if your receiver is rated for 160 watts per channel and your speakers are rated for 130 watts each. The receiver's maximum power output is a measure of its capability, but it does not mean that it will always output that amount of power. As long as you don't push the volume too high or introduce distortion, your speakers should be able to handle the power from the receiver.
Should your speaker watts be more then your amps?
No, the speaker watts should not be more than the amplifier output in terms of power. It is important to match the speaker's power handling capability with the amplifier's output power to avoid damaging the speakers. It's recommended to have an amplifier that can deliver power within the range recommended for the speaker.
How many watts per channel is a Sanyo jcx 2300 kr receiver?
The Sanyo JCX-2300KR receiver is rated at 100 watts per channel.
How many watts does a satellite receiver use?
A satellite DVR uses about 80 watts. This value can be found where the plug in cord meets the chassis of the recorder.
What happens to a 200 watt speaker with a amp that pushes 240 watts?
If the speaker is rated at 200 watts and the amp pushes 240 watts, there is a risk of overpowering and damaging the speaker. Exceeding the speaker's power handling capacity can cause distortion, overheating, and potentially result in permanent damage. It is important to match the power ratings of the speaker and amplifier to avoid such issues.
What is the best stereo receiver to power your home theater with Bose speaker system?
Is it a Bose Acoustimass system? If so, buy at least 90-100 watts per channel receiver. Think if you also need a zone 2 for outdoor speakers, so then you can power both rooms independently. You wont be able to use a Bose Companion computer speaker system with a surround receiver.
What size speakers should you use for my Yamaha natural sound av receiver HTR-5730?
Any speaker that has a RMS power rating (not peak or PMPO) of at least 100 watts, plus a subwoofer rated at a minimum of 200 watts should be sufficient.
What wattage amp please for tevion 5.1 surround sound system speaker shows 8 ohm They are 1 meter high uprights do I need 400 600 1200 watt?
If properly manufactured, your speakers should show the rated power they are capable of handling, not just the impedance on the boxes. The total power necessary for an average home theater is 100 watts per channel, so a 7.1 receiver should have a maximum output of 700 watts, a 5.1 receiver 500 watts.
Will your speakers blow if your receiver is 160 watts per channel but your speakers are only 130 watts each?
It is unlikely that your speakers will blow if your receiver is rated for 160 watts per channel and your speakers are rated for 130 watts each. The receiver's maximum power output is a measure of its capability, but it does not mean that it will always output that amount of power. As long as you don't push the volume too high or introduce distortion, your speakers should be able to handle the power from the receiver.
Front door speaker size in a 2005 Nissan altima?
They may vary according to system. In my non-Bose factory system, it is a 6" Clarion speaker. they are rated at 2 ohms and 40 watts max (25 watts nominal).
Should your speaker watts be more then your amps?
No, the speaker watts should not be more than the amplifier output in terms of power. It is important to match the speaker's power handling capability with the amplifier's output power to avoid damaging the speakers. It's recommended to have an amplifier that can deliver power within the range recommended for the speaker.
Your speakers will handle 400 watts but start to disort at 200 watts?
The speaker impedance does not match the amplifier's specified speaker impedance.
Which is better a 12.5 watts speaker or a 2 watts speaker?
It depends on the environment, a 2 watt speaker is usually smaller and more portable but a 12.5 watt speaker is louder and usually has better sound quality.
Will the Focal 165-CA1 6.5" Car Speaker work with any system?
Yes, the Focal 165-CA1 6.5" Car Speaker will work with any system that has a 25mm voice coil and can support 60 watts.
When a pair of 6x9s speakers are rated at 200 watts rms is that into one speaker or both?
Each speaker is rated at 200 watts rms
Is the sound louder the larger the watts speaker rating?
In laymen 's terms, yes. But the "Watts" of a speaker is not what the total power of the speaker is. The are usually two different ratings for speakers to determine the total power. One is "RMS", which means root-means square. And the terms "peak or continuose power". A speaker can be 400 Watts, 360 RMS, 390 continuous power. That means it will take an amp at least 400 Watts to drive the speaker properly. And the speaker will perform at 360 Watts RMS, and peak out at 380 Watts continuous power. Remember, u can't blow a speaker from overpowering it. Only from under power. The speaker will distort and sound horrible from overpowering, but it will not blow.
How many watts per channel is a Sanyo jcx 2300 kr receiver?
The Sanyo JCX-2300KR receiver is rated at 100 watts per channel.
